The hole walls after drilling are composed of non-conductive epoxy resin and fiberglass board. In order to connect circuits between different layers, it is necessary to metalize the hole walls through...
PCBWay
Aug 08,2022
3074 views
Since PCBWay moved to the new factory, after a year of adjustment, our production capacity and efficiency have been greatly improved. In order to give back to our customers for their support, we decid...
Anson Bao
Aug 05,2022
10673 views
HistorySLS ( Selective Laser Sintering ) is one of the earliest 3D printing technologies. Nowadays, the two most common powder bed fusion systems are plastic based, which is called SLS.PrincipleThe SL...
PCBWay
Aug 05,2022
3003 views
Aper-Oculus is a carrier board for Xilinx's Kria SOM and can provide compact and modular solutions for those with high-speed digital design. This board has a plethora of I/D, including FMC, MPI and a ...
PCBWay
Aug 05,2022
1620 views
To make the circuit of each layer connected, the boards need to go through the drilling process to make the corresponding holes according to the specifications in the drill files. For single and doubl...
PCBWay
Aug 01,2022
3169 views
By Hesam Moshiri, Anson BaoDisclaimer: Some parts of this circuit carry dangerous Mains voltage. Be careful with your experiments. If you are a beginner, ask some experienced users to guide you. ...
Anson Bao
Aug 01,2022
15116 views
Green used to be thought of as the typical PCB colour. The availability of various PCB colours has also increased with the development of technology and more inventiveness.Every patched circuit is bui...
PCBWay
Jul 29,2022
9455 views
Loko is battery operated GPS tracker that can send navigation data to its receiver via peer-to-peer LoRa radio. Based on radio communication, Loko doesn’t require a sim-card or monthly fee. It can wor...
PCBWay
Jul 29,2022
1460 views
Prior to lamination, the surface of inner image layer needs to go through an oxide process (brown oxide or black oxide treatment) to roughen and passivate the copper surface, increase the interaction ...
PCBWay
Jul 22,2022
3422 views
VXSDR-20 is a microwave software defined radio that has the ability to transmit and receives from 5 to 20GHz at 160 million samples per second. It has capabilities which are similar to other high-end ...
PCBWay
Jul 22,2022
1287 views
1.ABSABS is one of the most common thermoplastic materials with good mechanical property, excellent impact strength, high heat resistance and good machinability.ABS has a low density and is ideal for ...
PCBWay
Jul 22,2022
3182 views
Surface Pre-TreatmentThe copper sheet after cutting has oxides, grease and other impurities attached to the surface, which firstly needs to be pretreated. The main purpose of pretreatment is to remove...
PCBWay
Jul 19,2022
2576 views
Correction of the bent nylon pieceThe first step is to heat the side that needs to be repaired, soften it for correction.The second step is to take a heavy object and place it on the curved surface, c...
PCBWay
Jul 15,2022
2336 views
Pixel Pump is an open source vacuum pump for manual SMT assembly with a pen, a foot pedal, RGB LED buttons and a variety of functions that can make the process interesting. It is suitable for both ind...
PCBWay
Jul 15,2022
2203 views
Planned FeedingAs PCB gets unavoidably scrapped in the actual production process, the factory needs to add an additional proportion of materials to ensure the required quantity of good boards. The add...
PCBWay
Jul 11,2022
4958 views
Meshinger is the first handheld wireless router with battery, eInk display, SD card and a keyboard. Its hardware, operating system and all applications are also open-source, hackable and based on Open...
PCBWay
Jul 08,2022
1600 views
OvercutReasons:1. The strength of the tool is not suitable, which causes the tool to bounce.2. Improper operation by operator.3.&n...
PCBWay
Jul 08,2022
4522 views
All PCB orders need to go through the engineering department before being scheduled for production. Now let's explore what the engineering department does to ensure the smooth production. Checkin...
PCBWay
Jul 07,2022
1780 views
Quadrant is a human-computer interface based on an array of distance sensors. The hardware contains 4 time-of flight sensors, aims to detect the position, velocity and orientation of the users' hands ...
PCBWay
Jul 01,2022
1422 views
By Hesam Moshiri, Anson Bao A DC-to-DC converter is one of the most commonly used circuit topologies in electronics, especially in power supply applications. There are three major types of DC-to-...
Anson Bao
Jun 29,2022
7339 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 5 |
| 2 | Mason Goebel | 1 |
| 3 | Engineer | 1 |
