notes in the order are different from the designs in the files

Reason of pending review:In the notes that you said you need bottom layer and top solder mask, but usually in the single-side board, the copper layer and solder mask layer are on the same side, is there anything wrong?

Do you need bottom copper layer and bottom solder mask layer?

Suggestion: please choose the right options online to make sure we proceed with the order correctly, for example, if you need bottom layer and bottom solder mask, top silkscreen to be made, please choose the right option.

The parameters in gerber files are different from the order details online.
V-cut standard-Limited to Quick-turn PCB
Soldermask bridge
Some drills overlap the slots at GM or GKO
The outline of shape is too thick to ensure the dimension of PCB
The layout of PCB is unclear
Solder mask layer is opening entirely
Gerber files are not completed
Route Process in panel file
Several gerber files have in your order
Solder mask file is empty or None
Stackup information
The tab route is smaller than 1.6mm
V-scoring line/Slot in silkscreen layer
Some Issues concerning BGA(Ball Grid Array)
Design has no silkscreen layer but online is yes with silkscreen
Please clarify 1-layer or 2-layer
Requirement about castellated holes
The distance between the trace and board outline is less than 0.25mm
The holes is in the trace and it will cause open circuit

Comments (0)

This message here is only a suggestion supplement to the above content, and does not for trading operations such as orders. If you have any urgent questions or order issues, please contact your sales rep.

Upload a photo: You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP

0 / 10000

notes in the order are different from the designs in the files

Related articles