PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Help Center
Sending a message
9:00 - 23:00, Mon.- Sun. (GMT+8)
Service hotlines
+86 571 8531 7532

9:00 - 18:00, Mon.- Fri. (GMT+8)

9:00 - 12:00, Sat. (GMT+8)

(Except Chinese public holidays)

How can we help?

V-cut standard-Limited to Quick-turn PCB

Reason of failed review,there are 4 reasons.

A:The board size is less than 75*45/75*75mm.

B:The v-cut lines are not straight and through the whole board.

C:The spacing between the V-CUT lines and copper lines is less than 0.4mm.

D:the boards thickness is under 0.6mm.


Suggestions:

A: The board size in direction for V-CUT lines should be 75mm at least,the other side which don't do V-CUT should be 45mm at least.If there are V-CUT lines in  X and Y direction ,then the board size should be over 75*75mm.

B:The V-CUT lines should be straight and through the whole board.

C:The spacing between the V-CUT lines and copper lines should be over 0.4mm to avoid damaging the copper lines.

D:The boards thickness which can do V-CUT is over 0.6mm.

E:If the 4 items can't be fixed ,the V-CUT lines can be deleted and ignored  or  the boards can arranged in our high precision factory to do ,the price will be different.

a2.jpg

Comments (0)
This message here is only a suggestion supplement to the above content, and does not for trading operations such as orders. If you have any urgent questions or order issues, please contact your sales rep.
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000