Overview:

M3-M10 3D printed washers fit bolts or screws sized M3 to M10. They can be printed in a variety of materials such as PLA, ABS, PETG, and Nylon, making them ideal for rapid prototyping, small-scale manufacturing, or DIY projects. These washers offer flexibility in design but may not be suitable for heavy-duty or high-stress applications.

Printing Settings:

Common materials: PLA (for general use), ABS, PETG (for stronger applications), or Nylon (for high-strength needs).

Slicing Settings:

Layer Height: 0.1mm (or finer) for finest detail.

Infill: 100%

Post-Processing:

• None needed

How to Use M3-M10 Washers:

Use 3D printed washers in light to medium-duty applications such as prototypes, models, or home projects. For added strength, use stronger filaments like Nylon or combine with metal washers for reinforcement in certain applications.

Disclaimer:

3D printed washers are suitable for light to medium loads, but may not match the strength or durability of metal fasteners. The material and print quality will impact their performance, and they may not withstand high mechanical stresses or extreme conditions. Always test before use in critical applications, and avoid using for heavy-duty or safety-critical systems.