"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
This project uses the SCPI communication protocol, which is supported by many modern measurement and laboratory devices. However, one communication layer below, some of them rely on USB, some on RS-232, and others on RS-485, so any related project can hardly be universal. I own an OWON XDM 1041, and this design was intended for it. Nevertheless, disregarding the communication bus issue, both hardware and software should also work with other similar SCPI multimeters.
The hardware consists of an Arduino Uno carrying a custom shield with a microSD card module and an audio amplifier on it. If your SCPI multimeter has an RS-232 port, integration is easy. If it has USB, it is still possible. (Please see the full article at the link below.)
The current elementary audio tracks are in Serbian. They were recorded on a PC, using the Audacity software. There are 54 of them and they are placed in the root folder of the memory card. Each one contains a single isolated expression: "1", "2", "3"... "11", "12"... "20", "30"... "100"... "900", "point", "volts", "amperes", "milli", "kilo" etc. The program reads the value from the multimeter (in scientific notation) and from these audio snippets it assembles the number to be voiced, in a grammatically correct way, and then appends appropriate measurement units, with prefixes, if needed. For example, it will voice the number in microvolts if the voltage is less than 1 mV; in millivolts if the voltage is between 1 mV and 999.99 mV; in volts if the voltage is 1 V or more. The voiced number is always rounded to two decimal places, regardless of the unit and the prefix.
For any other language, the 54 audio snippets would have to be re-recorded. It would be easy for English or Russian, because the compound numbers in these two languages are formed in the same way as in Serbian. So each track should just be replaced with its English or Russian counterpart, while the program would remain the same. For French or German, it would be a little more work, because the program itself would have to be modified.
The SCPI documentation is easily available on the Internet.
The shield can also be used for other applications involving audio playback and recording with an appropriate Arduino library. The SMD resistors and capacitors are size 1206; they are large enough to solder even if you have no experience with SMD.
Description of the first prototype, program, audio examples, audio tracks and other files for download:
https://yu2zz.wordpress.com/2026/07/15/arduino-based-talking-multimeter-with-scpi-protocol/
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(1)
-
Sergio Veneziani
Sep 16,2026
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Mire YU2ZZ
-
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
This project uses the SCPI communication protocol, which is supported by many modern measurement and...
-
Three-Port Passive Ethernet Hub
This project is based on my original schematic from the year 2005, when I also built and tested a pe...
-
Automatic Switch for Five Antennas, with Both CAT and BCD Decoding - Appendix
I am adding the Gerber files for the relay box PCB.The first/main part of the project:https://www.pc...
-
Automatic Switch for Five Antennas, with Both CAT and BCD Decoding
This automatic antenna selector includes both CAT and BCD band decoders in the Arduino sketch, so it...
-
Antenna (or whatever) Selector SHIELD for Arduino Uno
This shield was designed with no particular project in mind. It aims to be useful for both automatic...
-
USB CW Keying Interface
The interface has been successfully tested with Win-Test and DXLog under Windows 10 and Windows 7 (b...
-
‘PIC-Keyer’: 2025 Edition
This is a Morse keyer by DL4YHF, who designed the circuit and wrote the software 26 years ago. I jus...
-
Simple but Smart Radio Direction Finding for VHF and UHF ‘Fox Hunting’
A diode will conduct RF only if it is forward-biased; that is why it can be used as a DC-controlled ...
-
Arduino-Based DSP Morse Decoder and Trainer
This real-time real-world Morse decoder and trainer uses the Goertzel algorithm to detect a CW tone ...
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
102 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
336 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
388 0 1 -
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1500 0 3







