Fabio Battaglia
ITALY • + Follow
Tools, APP Software Used etc.
|
KiCad 8.0KiCad
|
Description
dupico - EPROM_01 POD
The EPROM_01 POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support the most common 24/28/32 pin ROMs, the only requirement being that they can be powered by 5V, have GND in the lower left pin and VCC in the upper right.
You can find the original project here: https://github.com/DuPAL-PAL-DUmper/DuPAL_Board/tree/master/board/dupico_pods/pod_eprom_01
Sep 03,2024
492 views
dupico - EPROM_01 POD
adapter pod for dupico to read most common ROM types
492
0
0
Published: Sep 03,2024
Standard PCB
Download Gerber file 2
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Fabio Battaglia
-
DELTA Redux - RGB Video card
This is one of the two video output boards for the DELTA Redux retrocomputer.It provides analog RGB ...
-
DELTA Redux - Composite/TV Video card
This is one of the two video output boards for the DELTA Redux retrocomputer.It provides VHF output ...
-
DELTA Redux (Apple IIe clone)
The DELTA Redux is the recreation of a computer published by Nuova Elettronica in 1985. It is meant ...
-
TK2000 VDP TMS9918A board
The VDP board adds a TMS9918A Video Display Processor to the TK2000 computer, featuring colors, spri...
-
NES Flex Interconnect - Flexible Cable
The flex interconnect cable is a flexible PCB that can be used with the Slotmaster to replace the sp...
-
NES Flex Interconnect - STIFFENER
This module is the stiffener for the NES Flex interconnection cable project. It must be used togethe...
-
PlayStation PU-22 8MB RAM Daughterboard
This daughter board replaces the single main RAM IC on your PU-22 motherboard with 4 2Mx8 ICs, shuff...
-
TK2000 F.A.S.T.I.D.I.O.
The F.A.S.T.I.D.I.O. (Fully Addressable Simple Twin Interface Digital I/O) is an expansion card for ...
-
PlayStation Datel Cheat cart clone
Recreation (with a few improvements) of a clone (of a clone) of a PlayStation Datel cheat cart.This ...
-
TK2000 Disk Drive Interface
This card adds a dual floppy drive interface to the TK2000 home computer.It is compatible with the o...
-
TK2000 Bus extender
A bus extender for the TK2000 home computer, allowing up to 3 expansion cards to be installed.It is ...
-
NoCIC - Replacement NES CIC
This board uses a 555 circuit and minimal logic to implement a replacement of the CIC chip for the N...
-
TK2KB - TK2000 Keyboard
I recently built for myself a TK2000 clone, but I don't have a keyboard to use it, so I decided to t...
-
Famiclone Dendy to NTSC CPU adapter / Clock Multiplier
This board is a clock multiplier for cheap Dendy Famiclone CPUs, so they can be used in NTSC systems...
-
MiniPerformer+
This board is a remix of the Micromac Performer reversed by Bolle, resized for installation on the M...
-
The Padapter
This board converts a SEGA MegaDrive/Genesis 3-button gamepad for C64 (and similar)/Amiga use.All bu...
-
Commodore C128 (310381 R7) SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C128 with a 310381R7 motherboard.Y...
-
Angled 44 pin 2.0mm pitch adapter
I was in need of fitting a uSD to IDE adapter inside a cramped case, the connector for it was horizo...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
234 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
240 0 1 -
-
-
