Fabio Battaglia
ITALY • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
TK2000 VDP TMS9918A board
The VDP board adds a TMS9918A Video Display Processor to the TK2000 computer, featuring colors, sprites and fascinatingly low resolution!
Schematic and Layout
https://codeberg.org/hkzlab/TK2000_VDPboard
Oct 03,2025
64 views
TK2000 VDP TMS9918A board
TMS9918A Video Display Processor expansion board for the TK2000 home computer
64
0
2
Published: Oct 03,2025
Standard PCB
Download Gerber file 1
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2025/10/16 (GMT+8)
File update record
2025-10-1615:10:18
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(2)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Fabio Battaglia
-
TK2000 VDP TMS9918A board
The VDP board adds a TMS9918A Video Display Processor to the TK2000 computer, featuring colors, spri...
-
NES Flex Interconnect - Flexible Cable
The flex interconnect cable is a flexible PCB that can be used with the Slotmaster to replace the sp...
-
NES Flex Interconnect - STIFFENER
This module is the stiffener for the NES Flex interconnection cable project. It must be used togethe...
-
PlayStation PU-22 8MB RAM Daughterboard
This daughter board replaces the single main RAM IC on your PU-22 motherboard with 4 2Mx8 ICs, shuff...
-
TK2000 F.A.S.T.I.D.I.O.
The F.A.S.T.I.D.I.O. (Fully Addressable Simple Twin Interface Digital I/O) is an expansion card for ...
-
PlayStation Datel Cheat cart clone
Recreation (with a few improvements) of a clone (of a clone) of a PlayStation Datel cheat cart.This ...
-
TK2000 Disk Drive Interface
This card adds a dual floppy drive interface to the TK2000 home computer.It is compatible with the o...
-
TK2000 Bus extender
A bus extender for the TK2000 home computer, allowing up to 3 expansion cards to be installed.It is ...
-
NoCIC - Replacement NES CIC
This board uses a 555 circuit and minimal logic to implement a replacement of the CIC chip for the N...
-
TK2KB - TK2000 Keyboard
I recently built for myself a TK2000 clone, but I don't have a keyboard to use it, so I decided to t...
-
Famiclone Dendy to NTSC CPU adapter / Clock Multiplier
This board is a clock multiplier for cheap Dendy Famiclone CPUs, so they can be used in NTSC systems...
-
MiniPerformer+
This board is a remix of the Micromac Performer reversed by Bolle, resized for installation on the M...
-
The Padapter
This board converts a SEGA MegaDrive/Genesis 3-button gamepad for C64 (and similar)/Amiga use.All bu...
-
Commodore C128 (310381 R7) SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C128 with a 310381R7 motherboard.Y...
-
Angled 44 pin 2.0mm pitch adapter
I was in need of fitting a uSD to IDE adapter inside a cramped case, the connector for it was horizo...
-
Lava RSC Lite Famiclone Upgrade board
The Lava RSC is a family of very nice Famiclones that use ICs found in the original Famicom, complem...
-
A500 IDE LED mod board
This board reproduces the same circuit that the A500 uses to flash the "DRIVE" LED when the /MTR0 si...
-
C64 250407 SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C64 with a 250407 motherboard. I w...
You may also like
-
-
-
⚡ How to Make a DIY Spot Welding Machine at Home for 18650 Batteries | Full Circuit & Working
461 1 0 -
🔋 How to Make a Simple DIY Wi-Fi Router UPS at Home | Step-by-Step Guide with Circuit & PCB
282 0 2 -
-
-
