Description
USB HID Joystick Joypad adapter (JoyDivision) for Amstrad, Amiga, CD32, MSX, Nintendo NES, SNES, Sega Megadrive, THEA500Mini, THEC64
Inspired by OnyxSoft's JoyDivision project https://www.onyxsoft.se/joydivision.html
Credits to Stefan Blixth
Changes list from the original project:
- Replaced the XTAL and load caps with a SIP Ceramic Resonator (12MHz) [BOM list reduction]
- Simplified silk layer [cosmetic change]
Recently tested with THEA500 Mini and THEC64 made by Retro Games company
BOM list:
- 2x resistors 68 ohm 1/4W (SMT 0805)
- 1x resistor 1.5K ohm (SMT 0805)
- 2x zener diodes 3.6V 200mW (SMT SOD80)
- 1x 12MHz ceramic resonator (THT 3 pin, 2.54mm pitch)
- 1x MICROCONTROLLER AVR ATMEGA8-8AU (SMT TQFP32)
- 1x SUB-D 9pin Male connector (SMT)
- 1x USB A-type Male connector (THT 4 pins + shield)
Firmwares can be written using the HIDBootFlash app available at http://vusb.wikidot.com/project:hidbootflash
Code
Original project by Stefan Blixth
https://github.com/develin4000/joydivision
Circuit diagrams and Schematics
For flashing ATMEGA
http://vusb.wikidot.com/project:hidbootflash
CAD-Custom parts and enclosures
Original repository by Stefan Blixth
https://www.onyxsoft.se/files/joydivision-20220416.zip
Apr 15,2022
1,756 viewsReport item
USB HID Joystick Joypad adapter (JoyDivision) for Amstrad, Amiga, CD32, MSX, Nintendo NES, SNES, Sega Megadrive, THEA500Mini, THEC64
Inspired by OnyxSoft's JoyDivision project
Digital joystick adapter for USB-HID systems
1756
5
19
Published: Apr 15,2022
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(19)
- Likes(5)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
View More
More by kinmami
-
Commodore Plus 4 Plus/4 Joystick Interface
10x 100 ohm 0805/2012 SMD resistors2x 10K ohm 0805/2012 SMD resistors3x 0.1uF 0805/2012 SMD MLCC cap...
-
Commodore 16 Plus 4 C16 MOS TED 8360 7360 ESD Protection
11x ESDA5V3SC5 (Clamp Ipp Tvs Diode Surface Mount SOT-23-5)1x ESD55C104K4T2A-24 (0.1 µF ±10% 50V Cer...
-
Commodore 64 C64 CIA MOS 6526 ESD Protection
8x ESDA5V3SC5 (Clamp Ipp Tvs Diode Surface Mount SOT-23-5)1x ESD55C104K4T2A-24 (0.1 µF ±10% 50V Cera...
-
MX29F1615 EEPROM programmer based on an Arduino Mega 2560 (Commodore Amiga Kickstart)
MX29F1615 (16 bit EEPROM) programmerBased onhttps://framagit.org/acathla/eeprom-programmerandhttps:/...
-
Enhanced Flash Floppy Drive Plus 5.25" edge connector (internal) gotek
Enhanced Flash Floppy Drive Plus Improved Gotek for computers equipped with a 5.25" FDD FEATURES· ...
-
Enhanced Flash Floppy Drive Plus (internal) with thumb wheel encoder gotek shugart IBM Amiga Atari Amstrad Yamaha
Enhanced Flash Floppy Drive Plus Improved Gotek for Commodore Amiga (internal and external), Atari, ...
-
Enhanced Flash Floppy Drive Plus for Japanese computers gotek
Enhanced Flash Floppy Drive Plus FEATURES· Complete support of DD/HD images with AT32F435RxT7...
-
Enhanced Flash Floppy Drive Plus (Commodore Amiga external on DB23 port) gotek 1010 cumana
Enhanced Flash Floppy Drive Plus FEATURES· Complete support of DD/HD images with AT32F435Rx...
-
Enhanced Flash Floppy Drive Plus (internal) with push-buttons gotek
Enhanced Flash Floppy Drive Plus Improved Gotek for Commodore Amiga (internal and external), Atari, ...
-
Commodore Amiga 1200 Gayle Reset Fix SMD board
A hardware solution for Gayle PCMCIA reset bug.The Gayle U5 chip in Amiga 1200 does not reset PCMCIA...
-
HDD Clicker Vintage PC computers with ATAPI PATA IDE connector (TTL)
It is designed to work inside vintage personal computers with ATAPI PATA IDE interface.It connects p...
-
HDD Clicker Vintage PC computers with ATAPI PATA IDE connector
It is designed to work inside vintage personal computers with ATAPI PATA IDE interface.It connects t...
-
HDD Clicker Commodore Amiga 4000
It is designed to work inside Commodore Amiga 4000.It does connect CN302 and front fascia LED.
-
HDD Clicker Commodore Amiga 500 600 1200
It is designed to work inside Commodore Amiga 500/+, 600 and 1200.It connects pin 39 of the IDE conn...
-
Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC
External RGB video adapter from DB-23 female (input) to DE-15F (output, VGA) for Amiga computers.Com...
-
NEC PC-98xx serial mouse adapter (from PS/2 Mini DIN 6, USB-A to DE-9) Standard Arduino Mini Pro
Standard layout version for Arduino Mini Pro10K ohm SIP-7 (six resistors) bussed resistor networkMin...
-
Commodore Amiga 1000 1MB on-board RAM upgrade
Hardware modification to A1000 NTSC (with daughterboard) for adding 512K RAMOriginal repository of t...
-
SO to DIP 16 socket adapter
It allows mounting a SO-16 device to the DIP-16 socket.board thickness: 1.0mm is recommended.
You may also like
-
-
-
-
-
-
-
-
ESP32-S Development Board, in "Arduino Uno" form factor
3187 4 10
