ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
ESP32-S3-Touch-LCD-4.3
Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces 
Features
ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
- Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color
- Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
- Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Application Scenarios
Supports Multiple Peripherals
Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces
Application Example
for reference only, please refer to the Package Content for the detailed part list
What's On Board
Product Show
Outline Dimensions
Resources & Services
Wiki: https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-4.3
Shipping list：
- ESP32-S3-Touch-LCD-4.3 x1
- HY2.0 2P to 2PIN male cable 10cm ×2
- HY2.0 2P to 3PIN male cable 10cm ×1
- HY2.0 2P to 4PIN male cable 10cm ×1
- Standoff pack ×1
1
2
3
4
5
- Comments(0)
You might like
-
-
-
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor$32.00 or 3200 BeansRedeem Now
-
ESP32-S3 1.69inch Display Development Board, 240MHz Dual-Core Processor, 240×280 Pixels, Supports WiFi/Bluetooth, Micro LCD Display With ESP32-S3$15.00 or 1500 BeansRedeem Now -
-
-
-
T-Display S3 AMOLED 2.0 soldered pin | Upgraded from an LCD to an AMOLED display, better color display$30.00 or 3000 BeansRedeem Now -
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.00 or 5600 BeansRedeem Now -
-
-19%
T-0.85 Inch LCD Module | GC9107 Full Color Display IPS 128*128 Screen Development Board$4.00 or 400 BeansRedeem Now -
-15%
LILYGO T-Display-S3 1.9-inch LCD display development board(Touch Version Non-Soldered Pin)$22.00 or 2200 BeansRedeem Now -
-3%
1.54inch NFC-Powered e-Paper, No Battery, Wireless Powering & Data Transfer$27.00 or 2700 BeansRedeem Now -
-22%
4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer$70.00 or 7000 BeansRedeem Now -
-
Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless$13.00 or 1300 BeansRedeem Now -
5.65inch ACeP 7-Color E-Paper E-Ink Raw Display, 600×448, without PCB$46.00 or 4600 BeansRedeem Now -
-23%
2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI$13.00 or 1300 BeansRedeem Now -
2.9inch Touch E-Paper E-Ink Display HAT for Raspberry Pi, 5-Points Capacitive Touch, 296×128, Black / White, SPI$22.00 or 2200 BeansRedeem Now
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
In Stock
