>>PCB without supply (PART A)<<
This is 1-8 Channel Audio Amplifier Board. this board can play 8 speakers easily.
I used TDA2050 IC and 12-0-12 volt 5 AMP transformer for this project.
Materials for the Project
- 2 Capacitor 100uF 25V https://www.utsource.net/itm/p/6484473.html
- 1 Capacitor 10uF 25V https://www.utsource.net/itm/p/6484546.html
- 1 Capacitor 4.7uF 50V https://www.utsource.net/itm/p/6485200.html
- 2 Capacitor 4700UF 25V https://www.utsource.net/itm/p/6484487.html
- 1 Capacitor 0.22uf = 224 https://www.utsource.net/itm/p/8343273.html
- 1 Connector - Screw Terminal 3 Pin (5mm pitch) https://www.utsource.net/itm/p/8307998.html
- 1 Connector 2 Pin (2.54mm) https://www.utsource.net/itm/p/8310125.html
- 1 Connector 2 pin (3.96mm) https://www.utsource.net/itm/p/8309799.html
- 2 Diode 1N4007 https://www.utsource.net/itm/p/300046.html
- 4 Diode 6A4 https://www.utsource.net/itm/p/834101.html
- 1 IC TDA2050 https://www.utsource.net/itm/p/889073.html
- 1 Resistor 1/2 Watt 2.2 OHM https://www.utsource.net/itm/p/8294868.html
- 2 Resistors 1/4 Watt 22K https://www.utsource.net/itm/p/6491286.html
- 1 Resistors 1/4 Watt 560 OHM https://www.utsource.net/itm/p/8294722.html
- 4 Jumper
if you want to make this project please watch the video carefully
(This video has English subtitles)
Posted in
Audio ,
DIY Electronics,
Sep 28,2019
4,162 viewsReport item
- Comments(2)
- Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
View More
VOTING
6 votes
-
Engineer from
-
10design
-
9usability
-
8creativity
-
7content
8.50 -
-
Engineer from
-
2design
-
6usability
-
6creativity
-
6content
5.00 -
-
Engineer from
-
10design
-
10usability
-
10creativity
-
10content
10.00 -
-
Brijesh Kumar from INDIA
-
1design
-
2usability
-
10creativity
-
1content
3.50 -
-
MANISH SUNIL PAWAR from INDIA
-
10design
-
10usability
-
10creativity
-
10content
10.00 -
-
FEROZ ALAM from INDIA
-
1design
-
2usability
-
3creativity
-
4content
2.50 -