This is the 160 Watts Mono Audio Amplifier Board. this board can play 150 watts speakers easily.

I used TIP35C+TIP36C Transistors with TDA2030 IC and 18-0-18 volt 9 AMP transformer for this project. I recommend you to use 12-0-12 volt 14 Amp Transformer

Materials for the Project

• 1 Capacitor 10uF https://goo.gl/jS1JGs
• 1 Capacitor 0.0022uf = 222 https://www.utsource.net/itm/p/8344801.html
• 7 Capacitor 0.22uf = 224 https://goo.gl/fFuHNn
• 1 Capacitor 0.47uf = 474 https://www.utsource.net/itm/p/8353888.html
• 1 Connector 2 Pin (2.54mm) https://www.utsource.net/itm/p/8310125.html
• 1 Connector 2 pin (3.96mm) Male https://www.utsource.net/itm/p/8309799.html
• 1 Connector 2 pin (3.96mm) Female https://www.utsource.net/itm/p/8297620.html
• 1 Connector 3 pin (3.96mm) Male https://www.utsource.net/itm/p/8310110.html
• 1 Connector 3 pin (3.96mm) Female https://www.utsource.net/itm/p/8297600.html
• 4 Diode 1N4007 https://goo.gl/phHPEu
• 2 IC TDA2030 https://www.utsource.net/itm/p/8416171.html
• 1 Potentiometer 47K https://www.utsource.net/itm/p/8038957.html
• 2 Resistor ? Watt 1 OHM https://www.utsource.net/itm/p/8294885.html
• 4 Resistor ? Watt 2.2 OHM https://www.utsource.net/itm/p/8294868.html
• 3 Resistors 1/4 Watt 100K https://goo.gl/Dk2Nyq 
• 2 Resistors 1/4 Watt 3K3 https://goo.gl/t4o1zD
• 2 Transistor TIP35C https://www.utsource.net/itm/p/8424592.html
• 2 Transistor TIP36C https://www.utsource.net/itm/p/8181173.html
• 6 Transistor Mica insulator

if you want to make this project please watch the video carefully

(This video has English subtitles)