This is the 100+100 Watts Stereo Amplifier Board. this board can play two 100 watts speakers easily.


I used Toshiba 2SC5200 Transistors and 30-0-30 volt 5 AMP transformer for this project. I recommend using 8 amp transformer for this


Materials for the Project

4 Pcs. 2SC5200 Transistors https://www.utsource.net/itm/p/1238265.html

4 Pcs. A1015 Transistors https://www.utsource.net/itm/p/884248.html

4 Pcs. TIP41C Transistors https://www.utsource.net/itm/p/833781.html

2 Pcs. TIP42C Transistors https://www.utsource.net/itm/p/1377945.html

2 Pcs. 33 OHM 1/4 Watts Resistors https://www.utsource.net/itm/p/8294685.html

4 Pcs. 680 OHM 1/4 Watts Resistors https://www.utsource.net/itm/p/6491256.html

2 Pcs. 10 OHM 1/2 Watts Resistors https://www.utsource.net/itm/p/8294726.html

2 Pcs. 120 OHM 1/2 Watts Resistors https://www.utsource.net/itm/p/6478420.html

2 Pcs. 10 OHM 2 Watts Resistors https://www.utsource.net/itm/p/8307326.html

4 Pcs. 100 OHM 1 Watts Resistors https://www.utsource.net/itm/p/8294683.html

4 Pcs. 0.5 OHM 5 Watts Resistors https://www.utsource.net/itm/p/8444792.html

2 Pcs. 15K 1/4 Watts Resistors https://www.utsource.net/itm/p/6491283.html

2 Pcs. 56K 1/4 Watts Resistors https://www.utsource.net/itm/p/8294692.html

2 Pcs. 4.7K 1/4 Watts Resistors https://www.utsource.net/itm/p/8295203.html

2 Pcs. 22K 1/4 Watts Resistors https://www.utsource.net/itm/p/6491286.html

2 Pcs. 560 OHM 1/4 Watts Resistors https://www.utsource.net/itm/p/8294722.html

6 Pcs. 1N4007 Diode https://www.utsource.net/itm/p/300046.html

1 Pcs. Bridge Rectifier TS25P05G or GBJ2510 https://www.utsource.net/itm/p/8400522.html

2 Pcs. 101 Capacitors =100pf https://www.utsource.net/itm/p/8364282.html

4 Pcs. 102 Capacitors =1nf https://www.utsource.net/itm/p/8453306.html

6 Pcs. 104 Capacitors =100nf https://www.utsource.net/itm/p/8343272.html

2 Pcs. 474 Capacitors =470nf https://www.utsource.net/itm/p/8353888.html

6 Pcs. 47uf50v Capacitors https://www.utsource.net/itm/p/8361652.html

2 Pcs. 4700uf50v Capacitors https://www.utsource.net/itm/p/8361876.html

2 Pcs. 2pin 3.96mm Connectors https://www.utsource.net/itm/p/8309799.html

1 Pcs. 3pin 3.96mm Connector https://www.utsource.net/itm/p/8310110.html

1 Pcs. 3pin 2.54mm Connector https://www.utsource.net/itm/p/8310125.html


if you want to make this project please watch the video carefully

 Watch Videos with English Subtitles Now!  

  PART 1  



PART 2



Jun 10,2019
3,394 viewsReport item
  • Comments(5)
  • Likes(9)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More
    VOTING 16 votes
    • Engineer from
      • 8
        design
      • 8
        usability
      • 4
        creativity
      • 3
        content
      5.75
    • Ilya Galkin from RUSSIAN FEDERATION, THE
      Senior hardware engineer
      • 10
        design
      • 10
        usability
      • 9
        creativity
      • 8
        content
      9.25
    • Catia Diaz from MEXICO
      Catia Diaz director of YouTube channel catykanal that was created to insentiate the taste for electronics with tutorials explained in a simple and fun way. Teacher with more than 3 years of experience in promoting the learning of electronics to children and young people.
      • 9
        design
      • 5
        usability
      • 5
        creativity
      • 5
        content
      6.00
    • Engineer from TURKEY
      • 9
        design
      • 8
        usability
      • 8
        creativity
      • 9
        content
      8.50
    • Jiri Praus from CZECH REPUBLIC, THE
      If you got a low score from me, I don't think you fit for I can solder content. Sorry for that, at least I tried to rate your design. I am an artist. I design electronics and brass wire sculptures. www.jiripraus.cz
      • 7
        design
      • 1
        usability
      • 1
        creativity
      • 1
        content
      2.50
    • LUIS HARO from
      Youtuber & PCB Designer
      • 8
        design
      • 8
        usability
      • 8
        creativity
      • 8
        content
      8.00
    • Mert KILIC from TURKEY
      Founder and creator of Mert Arduino YouTube channel
      • 10
        design
      • 10
        usability
      • 8
        creativity
      • 8
        content
      9.00
    • Engineer from INDIA
      • 10
        design
      • 10
        usability
      • 10
        creativity
      • 10
        content
      10.00
    • Ever since I was a kid, I love tinkering with anything that involves energy from toys to cellphones. I love designing and creating projects that could be innovative with the use of electronics. I was also appointed team leader of the University of Sto. Tomas team for the Shell Eco-marathon Philippines Competition in 2018.
      • 8
        design
      • 9
        usability
      • 4
        creativity
      • 8
        content
      7.25
    • João Duarte from PORTUGAL
      http://elab-hackerspace.org/ | http://sandworx.com/
      • 8
        design
      • 9
        usability
      • 8
        creativity
      • 4
        content
      7.25
    • J_RPM from SPAIN
      My name is José Ramón Pueyo, I live in Spain. For more than 40 years he has worked in the radio communication sector, mainly with RF equipment and developing control and monitoring systems.Five years ago I opened a channel on YouTube (J_RPM) in order to share some developments and divulge technical information.
      • 10
        design
      • 10
        usability
      • 10
        creativity
      • 10
        content
      10.00
    • www.cursoderobotica.com
      • 10
        design
      • 10
        usability
      • 10
        creativity
      • 10
        content
      10.00
    • PCBWay Support from CHINA, PEOPLES REPUBLIC
      PCBWay Online Support Team
      • 9
        design
      • 8
        usability
      • 9
        creativity
      • 8
        content
      8.50
    • Engineer from INDIA
      • 10
        design
      • 10
        usability
      • 10
        creativity
      • 10
        content
      10.00
    • Engineer from
      • 10
        design
      • 10
        usability
      • 10
        creativity
      • 10
        content
      10.00
    • Engineer from MEXICO
      • 9
        design
      • 10
        usability
      • 9
        creativity
      • 10
        content
      9.50
    View More