I want to make a PCB as one design, but with a part as a 'break-off' section - see the picture with the large slot near the top of the board. The board measures about 130 x 100mm overall.Is this the b...
In the manufacturing industry, after the process designer has designed the PCB, does it need to check the design results? The answer is yes, and there is more than one way to check.The first is DRC in...
We have issue regarding strenght of copper track on substrate. The SMT spacer peels off with copper track after screw fitting. please refer to photo.Request your help on this issue.thanks,AY
Dear PCBWay team,We are planning to design and assembly a PCB based on component packages 169-UFBGA, 48-TFBGA and 24-TBGA (below component datasheets).https://drive.google.com/file/d/1hb7V2dKdQwzR6jNW...
I have a PCB design with a board size of 20*346mm and a thickness of 2.4mm. On the short edge of the board (20mm) a edge connector is located. I would like this connector to have a bevel. Would this b...
