project Spitron

Good morning every one my name is Dominion Bright, I live in Nigeria, and my current project is on a robotic spider with a total of 6 legs, I have built robots in the past, my first ever robot was a robotic AI smart car assistant, I used an ESP32 board for the project, but the ESP32 could only handle a little so I thought of an idea of using my laptop as the main brain of the robot, so the ESP32 would only be receiving commands and AI response to any question. Now back to my current project, I got the inspiration from a well known Robotics Engineer here In Nigeria ( Silas Adekunle ) from is gaming Spider Robot from there I had have the interest on making my own spider robot as well but due to my current financial position, I couldn't get all the parts I needed, and that is why I am hoping PCB way could sponsor this project and I will also be making a video about it for anyone who is interested in this project. So the things needed to build this robot are: A Raspberry PI for AI and advanced image processing, STM32 for the best motor control, 18 heavy gear motors, Raspberry PI camera, expansion board, cooler for Raspberry PI and an AI chip to make the Raspberry PI much faster, Sound Amplifier, Speaker, Microphone module, Sound Module, Lider Sensor, Battery Holder and Battery. Please PCB way sponsor me, I really need the support to build this robot, and to everyone that is interested in this project, you can ask any questions via Gmail, here is my Gmail account ( dominionbright8@gmail.com ). And you can also ask for images of videos from the Gmail because my laptop is having a problem to upload any video or images. PCB way I hope you would be kind to just sponsor this project please, thank you very much. My PC is having uploading the images so if you want the image visit my email ( dominionbright8@gmail.com ), please PCB way I will really appreciate it if you sponsor the video. So and lastly here is how the robot will work, in other to split the workload I used to microcontroller, the Raspberry PI for AI replies and advanced image processing through OpenCV, and a STM32 for better motor control, 18 heavy gear servo motors for more and better degree of freedom, a 360 degree lidar sensor on the top for a round sweep of obstacles, an AI chip on the raspberry PI for faster LLM processing and a cooler for the PI, all the parts/ body will be 3D printed, and again if you are interested in this project please don't hesitate to visit my email, thank you very much PCB way.