Electric Start For Suzuki

I have always built things from when I was small and this has lead me to try to create an electric start for my Suzuki RMZ 250 (dirt bike) I always wanted to make an electric start (just press a button and it starts, no more kicking). I want to make an electric start so that I can start my bike easily, with a push on a button. I do a lot of dirt biking and when you fall down you lose a lot of energy and then kicking your bike makes it even harder because you are already tired. Adding an electric start is going to be a lot more convenient thing.

The way it works is that you remove the stock kickstart/mechanism inside the engine and swap the parts with the custom parts (a gear, shaft and one-way bearing) when you press the button its going to activate the starter motor and its going to make the bearing move one way and turn the engine over. Once you let go of the button the bearing is going to be free spinning and the shaft is not going to spin, but the engine is going to run.

The picture above shows the kickstart. I want to get ride of the kick start and swap out the gear mechanisms behind the kickstart with the new mechanism .The starter motor is going to sit behind the kick starter which will allow the motor to be hidden an good looking. The picture above show where the motor has enough room to sit behind the kickstart. The picture at the bottom is where I have my one way bearing and to shafts that I had in the garage and that gave me an idea on how everything work. I took this and turned it into a design and I now want to make a prototype for my bike.

I have designed the parts that I would need to make this project possible and would be happy to work with you to make this project possible.

Thank you for you time.