|
|
header pin 2.54mm x4 |
x 2 | |
|
|
SNES Slot Cartridge |
x 1 |
SNES pic12f supercic flashing adaptator
an adaptator designed for flash the .hex of the supercic of the pic12f629/675 on my smt assembly flashcard.
the adaptator is universal in theory , but only tested on GQ-4X4
dont make a mistake with front and back side , its writed on the adaptator and on the flashcard .
dont program too fast with it , on my GQ 4X4 i need set the speed to ''+1'' or ''0'' , at ''+2'' it program bad.
order it in HASL 1.6mm thickness
ONLY compatible with theses marv17 flashcard :
https://www.pcbway.com/project/shareproject/SNES_2_mb_flashcard_Lorom_Hirom_nosave_pcb_a6cb9002.html
SNES pic12f supercic flashing adaptator
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(2)
More by marvin marv17
-
MD DUMPER , Sega Genesis/Megadrive ARM dumper
An fast megadrive/genesis dumper with arm MCU , it can flash your flashcard up to 150kb/s depending ...
-
Sega CD ram Cart 1mbit , reproduction of sega Design
an Sega CD ram Cart 1mbit , reproduction of sega 1991 Designthe pcb have been tested and it work , ...
-
Nintendo N64 Controller pak reproduction PCB
an reproduction of the nintendo N64 design of controller pak , perfect for replace your defective ni...
-
PC Engine/Turbografx-16 adaptator for Sanni Card Reader
Another PC Engine/Turbografx16 advanced adaptator for Sanni Card Reader but what he have in more tha...
-
Flashkit MD , enhanced edition , Sega Megadrive/Genesis Dumper
an 2025 enhanced edition of the flashkit md from Krikzzthis project have been tester and it work , t...
-
SNES 4MB Lorom/Hirom flashcard with saving feature
An 4mb variant of my 8mb flashcard , will cost a little less , it use an mx29lv320 4mb flashchip ins...
-
SNES 8MB Lorom/Hirom/ExLorom/Exhirom flashcard with saving feature
An Snes 8mb save flashcard , switchable to lorom or hirom with the switch at right , and to EX mode ...
-
SNES pic12f supercic flashing adaptator
an adaptator designed for flash the .hex of the supercic of the pic12f629/675 on my smt assembly fla...
-
SNES 4mb flashcard Lorom/Hirom nosave pcb , UPDATED
I updated my nosave flashcard lorom/hirom for SNES , the pcb support now a variety of flashchip , th...
-
Bluepill stm32f103 custom , aligned I/O
An custom bluepill boardon my one the B2 IO is directely accessible , at the place of the ''reset'' ...
-
Sega 32X 4Mo FRAM save repro PCB
A 32X variant of my Sega Megadrive/Genesis , 4Mo FRAM save repro PCBi have nothing in 32x to test if...
-
SNES FlashCard Lorom/Hirom , 4mb max save pcb , UPDATED
2025 update : revision 1.2 can now have the pic12f629/675 flashed with my slot cartridge adaptator :...
-
SNES / SUPER FAMICOM Region free unlock pcb
snes/super famicom home zoning adapterbetter compatibility than old adapters or needed 2 cartridges ...
-
SNES DIP 42 Lorom/hirom 2MO max save pcb
An SNES DIP 42 Lorom/hirom with save feature ( 256kb sram max in lorom , 64kb max in hirom )latest r...
-
flashchip to dip42 adaptator
an flashchip adaptator for dip42 formatfor make a flashcard for exemple , or other thinksi suggest t...
-
N64 Controller PAK FRAM DIP
N64 Controller PAK with DIP28 FRAMAnyone have used a dip one before me , very easy to assemble it yo...
-
N64 Controller PAK FRAM SOIP
N64 Controller PAK with SOIP-28 FRAMyou can put fm18w08 / fm18l08 / fm28v020 , or other fram with sa...
-
SNES DIP 42 Lorom/hirom nosave pcb
An SNES DIP 42 Lorom/hirom nosave pcb2mo maximal capacityyou can use dip42 eprom type 27c160 (2mo ) ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1147 2 1 -
RadioHAT - Raspberry Pi radio development platform
956 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3381 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3997 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4387 2 2
