Description
RT DCC Pulse 8 High Power Turnout Decoder with capacitor discharge unit.
This is a DCC accessory decoder for driving higher power devices.
Specifically items like Atlas turnout solenoids which will draw upto 4A.
The firmware is in the github repo.
This is a totally through hole design so can be constructed by anyone with basic soldering skills.
See the construction and operation manual for full details.
Code
RT Pulse 8 accessory decoder firmware
https://github.com/Rosscoetrain/DCC-Turnout-Decoder-Direct
Schematic and Layout
Schematic Page 1
RT_Pulse_8_HP_decoder_Schematic_P1_2023-10-04.png
Schematic page 2
RT_Pulse_8_HP_decoder_Schematic_P2_2023-10-04.png
Construction Manual
construction_manual.pdf
Operation Manual
operation_manual.odt
Oct 04,2023
1,780 views
RT DCC Pulse 8 High Power Turnout Decoder with capacitor discharge unit.
A DCC accessory decoder with up to 8A output per 16 channels.
1780
2
0
Published: Oct 04,2023
Standard PCB
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Ross Ross
-
RT DCC Booster
Based on this by D Bodnar:http://trainelectronics.com/DCC_Arduino/DCC_Booster_2/index.htmRather than...
-
A TCA8418 Matrix breakout board
A breakout board for the Adafruit TCA8481 module.Can have screw terminals or male or female headers ...
-
RT TCA8418 expansion board
A breakout board for the Adafruit TCA8418 module.This provides easy access for upto 80 keys or leds.
-
RT_MCP23017
This board is an MCP23017 breakout board with 3 way pins for easy connection of sensors, leds or swi...
-
RT DCC Pulse 8 High Power Turnout Decoder with capacitor discharge unit.
This is a DCC accessory decoder for driving higher power devices.Specifically items like Atlas turno...
-
RT DCC Pulse 8 Turnout Decoder with capacitor discharge unit.
A DCC accessory decoder for control of 8 dual solenoid devices.Can also be used for control of upto ...
-
DCC DIY stay alive single row
This is a keep/stay alive for use with DCC model rail road decoders.So far tested with ESU Lokpilot ...
-
DCC DIY stay alive
This is a keep/stay alive for use with DCC model rail road decoders.So far tested with ESU Lokpilot ...
-
DCC-Accessory-Decoder
This project is no longer supported it is here for those users who have already used them.If you are...
-
DCC-EX Solenoid Turnout Driver with Capacitor Discharge Unit
This project is no longer supported by me.It is kept here for those that have already purchased them...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
340 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
322 0 1 -
-
-
