Components
|
|
JUWT1105MCDNichicon
|
x 4 | |
|
1N5240B-TAPVishay General Semiconductor - Diodes Division
|
x 1 | |
|
|
1N4001Diotec Semi
|
x 1 | |
|
|
MFR-25FTE52-68RYAGEO
|
x 1 |
Description
DCC DIY stay alive single row
This is a keep/stay alive for use with DCC model rail road decoders.
So far tested with ESU Lokpilot 4 and Lokpilot 5, Digitrax DH166D, LaisDCC 860014 decoders.
The components list is usable up to a track voltage of 15V DC.
If you are using a track voltage above 15V DC then change the resistor to 100R and 1/2W.
This version is layed out in a single row for different space options.
The schematic shows the components
Schematic and Layout
DIY_stay_alive_4_cap_schem.pdf
Jun 06,2023
1,073 views
DCC DIY stay alive single row
1 Layers PCB 7.8 x 24.1 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
1073
3
4
Published: Jun 06,2023
Standard PCB
Download Gerber file 14
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(4)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Ross Ross
-
RT DCC Booster
Based on this by D Bodnar:http://trainelectronics.com/DCC_Arduino/DCC_Booster_2/index.htmRather than...
-
A TCA8418 Matrix breakout board
A breakout board for the Adafruit TCA8481 module.Can have screw terminals or male or female headers ...
-
RT TCA8418 expansion board
A breakout board for the Adafruit TCA8418 module.This provides easy access for upto 80 keys or leds.
-
RT_MCP23017
This board is an MCP23017 breakout board with 3 way pins for easy connection of sensors, leds or swi...
-
RT DCC Pulse 8 High Power Turnout Decoder with capacitor discharge unit.
This is a DCC accessory decoder for driving higher power devices.Specifically items like Atlas turno...
-
RT DCC Pulse 8 Turnout Decoder with capacitor discharge unit.
A DCC accessory decoder for control of 8 dual solenoid devices.Can also be used for control of upto ...
-
DCC DIY stay alive single row
This is a keep/stay alive for use with DCC model rail road decoders.So far tested with ESU Lokpilot ...
-
DCC DIY stay alive
This is a keep/stay alive for use with DCC model rail road decoders.So far tested with ESU Lokpilot ...
-
DCC-Accessory-Decoder
This project is no longer supported it is here for those users who have already used them.If you are...
-
DCC-EX Solenoid Turnout Driver with Capacitor Discharge Unit
This project is no longer supported by me.It is kept here for those that have already purchased them...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
230 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
238 0 1 -
-
-
