Commodore Plus 4 Plus/4 Joystick Interface
10x 100 ohm 0805/2012 SMD resistors
2x 10K ohm 0805/2012 SMD resistors
3x 0.1uF 0805/2012 SMD MLCC capacitors
2x SN74LS244DWR SMD
1x SN74LS125ADR SMD
10x 1N914 (or 1N4148) DO-35 existing diodes from the original commodore motherboard.
Diodes are replaced by header connectors (male) on the motherboard.
The PCB will have female header connectors on the bottom to plug to the motherboard.
5V and GND, D1 and D2 should be wired as well.
Top silk layer screen reports instructions.
The 3pin jumper allows selecting normal joyport numbers and swapped (JOY 1 <-> JOY 2) or both disabled.
PCB thickness 1.0mm
Commodore Plus 4 Plus/4 Joystick Interface
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(4)
- Likes(5)
-
Francisco Meza
Sep 16,2023
-
Alexander Kisler
Sep 06,2023
-
Holger OnkelHolgi
Sep 02,2023
-
Mark Peter Vargha
Aug 19,2023
-
(DIY) C64iSTANBUL
Mar 09,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Edoardo kinmami
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
Compact design for high efficiency (>93%) USB-C Power Supply for Commodore 1541-II or 1581 Extern...
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
Version 2Compact design for high efficiency (>92%) USB-C Power Supply for Amiga 500, 600, 1200.Tw...
-
Commodore AMIGA PSU USB-C Power Sink Delivery Supply High Efficiency Triple Output 5V ±12V OLED ATARI ST shark
NEW VERSION https://www.pcbway.com/project/shareproject/V2_Commodore_AMIGA_USB_C_Power_Sink_Delivery...
-
Commodore AMIGA LED 500 600 1200 2000 status board multi system for debugging and troubleshooting hardware
A LED status PCB to connect A500, A600, A1200, A2000 motherboards for troubleshooting purposes witho...
-
Commodore MAX Machine RF modulator replacement S-VIDEO bypass
Inspired by projects from c0pperdragon, mbarszcz-pcb, tebl and VGP.It fits the commodore MAX MACHINE...
-
Enhanced Flash Floppy Drive Plus internal with push-buttons gotek goex Atari Amiga Amstrad Yamaha HD OSD
Enhanced Flash Floppy Drive Plus Improved Gotek for Commodore Amiga (internal and external), Atari, ...
-
Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars
External RGB video adapter from DB-23 female (input) to DE-15F (output, VGA) for Amiga computers.Com...
-
Commodore Amiga 500 Zorro II slot adapter board A500 plus expansion
Zorro II expansion card for the Commodore Amiga 500 / PlusOriginal design by Matze posted on https:/...
-
RAM adapter SOJ26 DIP20 right
A solution to install SOJ26 chips into DIP20 sockets (right side oriented)BOM list:TC514400ASJ-x0 TO...
-
RAM adapter SOJ26 DIP20 left
A solution to install SOJ26 chips into DIP20 sockets (left side oriented)BOM list:TC514400ASJ-x0 TOS...
-
Commodore Amiga 1000 Rejuvenator Re-creation Project RAM adapter SOJ26 DIP20
BOM list:TC514400ASJ-x0 TOSHIBAhttps://ja.aliexpress.com/item/1005008511708613.html?spm=a2g0o.order_...
-
Commodore Amiga 1000 Rejuvenator Re-creation Project
BOM list: https://www.digikey.com/en/mylists/list/W055A8OMP7Additional items:https://ja.aliexpress.c...
-
Commodore Amiga DB23 RGB VGA External Video Buffer (V8) Jail bars free
External RGB video adapter for Amiga computers, converting from DB-23 female (input) to DE-15F (VGA ...
-
Commodore Amiga 500 Plus + Chip RAM expansion to 2MB for Fat Agnus 8375 Rev 8
Commodore Amiga 500 Chip RAM expansion to 2MB for Fat Agnus 8375 mounted onto Rev 8.No modification ...
-
Commodore MAX Machine RF modulator replacement S-VIDEO COMPOSITE bypass V2
Inspired by projects from c0pperdragon, mbarszcz-pcb, tebl and VGP.It fits the commodore MAX MACHINE...
-
Commodore MAX Machine RF modulator replacement S-VIDEO AUDIO bypass V2
Inspired by projects from c0pperdragon, mbarszcz-pcb, tebl and VGP.It fits the commodore MAX MACHINE...
-
Commodore 16 (C16) Plus 4 RF modulator audio s-video replacement V2 C116 264 series
Commodore 16 (C16) & Plus/4 RF modulator replacementIt fits the commodore 16 & Plus/4 and re...
-
Commodore Amiga Atari Joystick Pad Mouse External Passthrough USB 5V adapter with ESD protection 64 128 VIC-20
There is no longer a need for a 5V external power supply unit with a USB port.With this solution, Co...
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
55 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
535 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
526 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
735 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
699 0 1 -
-
AEL-2011 Power Supply Module
1378 0 2







