Arduino Uno Proto Shield
Arduino Uno Proto Shield – Universal Prototyping Board
Project Overview
The Arduino Uno Proto Shield is a universal prototyping and expansion PCB designed for Arduino Uno R3 projects.
It follows the standard Arduino Uno R3 shield layout and provides access to the board's headers, power connections, analog inputs, digital I/O pins, and communication pins. In addition to the standard shield connections, the PCB includes extra linked holes for easier wiring and a large solderable dot-grid area for building custom circuits.
The board allows you to develop custom electronics directly on a PCB without relying on a separate breadboard. It is suitable for testing circuits, creating custom shields, connecting sensors and modules, and building permanent prototypes.
The prototyping area uses a standard 2.54 mm (0.1-inch) grid, making it compatible with common through-hole components, DIP ICs, pin headers, and breadboard-compatible parts.
This board is part of my DIY Universal Boards open-source hardware collection.
Why I Made This
In 2019, I shared a simple 100 × 50 mm DIY universal board. I kept using it in my projects, and I continued wishing that it was available in more sizes and in versions specifically designed for the development boards I use every day.
Instead of redesigning just one PCB, I decided to create an entire family of universal boards.
The result is a collection of 24 open-source PCB designs, including prototyping boards, development-board carriers, shields, adapters, and PCB rulers. All designs follow a common 2.54 mm grid standard and focus on practical layouts, clear labeling, and manufacturing quality.
This Arduino Uno Proto Shield is one of those designs. It combines the familiar Uno shield footprint with a large universal prototyping area, making it easy to build custom circuits while keeping the Arduino platform accessible.
Board Features
Arduino Uno R3 Shield Compatibility
The PCB follows the Arduino Uno R3 shield outline and includes all four Uno mounting holes.
The header layout follows the standard Uno R3 arrangement, including the characteristic 160 mil spacing between D7 and D8.
The board can be used as a custom Arduino shield, allowing you to build additional circuitry directly on the PCB while connecting it to an Arduino Uno.
Complete Header Access
The PCB provides access to the main Arduino Uno connections:
Digital pins D0–D13
Analog inputs A0–A5
Power pins
GND
VIN
5V
3.3V
RESET
AREF
SDA
SCL
All pins are clearly labeled on the PCB to simplify circuit construction, wiring, debugging, and troubleshooting.
Extra Linked Hole for Every Header Pin
Each header pin has one additional linked hole.
These extra holes provide convenient soldering and wiring points, making it easier to connect components and external circuits without crowding the main header positions.
You can use these additional holes for jumper wires, component connections, signal routing, and custom circuit extensions.
Large Dot-Grid Prototyping Area
The center of the board contains a large solderable dot-grid area.
This space is intended for custom circuit construction and can be used to install:
DIP integrated circuits
Resistors
Capacitors
Transistors
Diodes
Pin headers
Jumper wires
Small modules
Breadboard-compatible components
The grid provides flexibility for a wide range of experimental and permanent prototype circuits.
Standard 2.54 mm Grid
The prototyping area uses a standard 2.54 mm (0.1-inch) pitch.
This spacing is compatible with common through-hole components and makes it easy to transfer circuits from a breadboard to the PCB.
USB Connector Clearance
A dedicated clearance area is provided over the Arduino Uno USB connector.
This area has no copper, helping prevent unwanted electrical contact or short circuits beneath the USB connector when the shield is installed.
Plated-Through Holes
The prototyping pads use 1.0 mm plated-through holes with 1.8 mm pads on both sides.
The plated-through construction provides electrical continuity between the PCB layers and improves pad strength during soldering and rework.
The pad dimensions are designed to provide convenient soldering points for standard through-hole components and wires.
Four Mounting Holes
The PCB includes the four standard Arduino Uno mounting holes.
These allow the assembled shield to be mounted securely and help maintain mechanical compatibility with the Arduino Uno board.
Technical Specifications
SpecificationDetailsProjectArduino Uno Proto ShieldCompatibilityArduino Uno R3PCB dimensions68.6 × 53.3 mmPCB layers2 layersMaterialFR-4Thickness1.6 mmGrid pitch2.54 mm / 0.1 inchHole diameter1.0 mmPad diameter1.8 mmHole typePlated-throughPad copperBoth sidesPrototyping areaDot gridMounting holes4 Uno mounting holesLicenseCC BY-SA 4.0
Applications
This board is useful for a variety of Arduino Uno-based projects.
Custom Arduino Shields
Build your own expansion shields for:
Sensor interfaces
Display modules
Motor drivers
Relay circuits
Communication interfaces
Control circuits
Electronics Prototyping
Use the dot-grid area to test circuit ideas, build experimental circuits, and create custom electronics before designing a dedicated PCB.
Educational Projects
The board is suitable for schools, workshops, electronics training, and maker projects.
Students can learn about circuit construction, soldering, component placement, PCB layout, and Arduino hardware using a reusable prototyping platform.
Custom Hardware Development
The board is useful when a project needs additional circuitry that cannot conveniently be assembled on a breadboard.
It allows you to create a more permanent prototype while maintaining the flexibility of a universal PCB.
PCB Manufacturing Specifications
Recommended PCB manufacturing settings:
Layers: 2
PCB material: FR-4
Thickness: 1.6 mm
Surface finish: HASL
Lead-free HASL: Recommended for boards intended for distribution or educational use
Solder mask: Any colour
Silkscreen: White
Minimum hole size: 1.0 mm
No special manufacturing options are required.
The design is suitable for standard PCB fabrication.
Assembly Recommendations
Use stacking headers if you want to allow additional shields to be installed above this board.
Verify the Arduino Uno orientation before soldering the headers.
Keep the USB connector clearance area free from copper or components.
Use the additional linked holes to simplify circuit wiring.
Use the central dot-grid area for your custom circuit.
Check the pin labels carefully when connecting external hardware.
Stacking headers are particularly useful when this shield is used as part of a multi-shield Arduino assembly.
Design Quality
The PCB design has been checked using Design Rule Check (DRC).
The board passes the design rule check with zero errors.
The design uses standard manufacturing specifications and does not require special fabrication options.
Open-Source Hardware License
This project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.
You are free to:
Manufacture this PCB
Use it in your own projects
Modify the design
Create derivative versions
Share your improvements
Please provide attribution to the original project and distribute derivative works under the same license.
DIY Universal Boards Collection
This Arduino Uno Proto Shield is part of my DIY Universal Boards collection, which includes 24 open-source PCB designs.
The collection includes:
Dot-grid prototyping boards
Stripboards
Breadboard layouts
Raspberry Pi Pico carriers
ESP32 development-board carriers
ESP8266 development-board carriers
Arduino Nano carriers
D1 Mini carriers
C3 SuperMini carriers
Blue Pill carriers
Arduino Uno shields
Arduino Mega shields
Raspberry Pi HAT-size boards
SMD adapters
PCB rulers
LED chaser rulers
The goal of the collection is to provide reusable, practical PCB building blocks for makers, students, hobbyists, engineers, and electronics developers.
Project Files
The complete PCB design and manufacturing files are available in the GitHub repository.
DIY Universal Boards Repository:
https://github.com/ElectroIoT/DIY-Universal-Boards
The repository contains Gerber files, design documentation, and additional PCB designs from the collection.
Designed by ElectroIoT.in
This project is designed and shared as part of my open-source electronics and DIY hardware projects.
Website: https://electroiot.in
GitHub: https://github.com/ElectroIoT/DIY-Universal-Boards
Build • Learn • Experiment • Share
Arduino Uno Proto Shield
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by MANORANJAN DAS
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
BorePilot is an open-source controller board for a single-phase submersible (borewell) pump. An ESP3...
-
EasyArduino
EasyArduino by ElectroIoTThe ultimate beginner’s board to learn, build, and master Arduino the easy ...
-
Wemos D1 mini Proto Board 50 x 45 mm
Wemos D1 Mini Proto Board – 50 × 45 mm Universal Prototyping PCBProject OverviewThe Wemos D1 Mini Pr...
-
Arduino Uno Proto Shield
Arduino Uno Proto Shield – Universal Prototyping BoardProject OverviewThe Arduino Uno Proto Shield i...
-
Arduino Nano Proto Board 70 x 50 mm
Arduino Nano Proto Board 70 × 50 mmUniversal Prototyping Board for Arduino NanoThe Arduino Nano Prot...
-
Arduino Mega Proto Shield
Arduino Mega 2560 Proto Shield – Universal Prototyping BoardProject OverviewThe Arduino Mega 2560 Pr...
-
LED Chaser PCB Ruler 10 cm
LED Chaser PCB Ruler 10 cmA Functional PCB Ruler with a Rainbow LED ChaserThis project combines a pr...
-
LED Chaser PCB Ruler 15 cm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
DIY Universal Board 100 x 50 mm V2
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
ESP32-C3 SuperMini Proto Board 50 x 40 mm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
SafeASP: USB-C AVR ISP Programmer with 1.8-5.5 V Level Shifting (USBasp V6)
Why I made SafeASPThe USBasp is the cheapest and most popular AVR programmer, and I have shared two ...
-
Universal USB Flasher V2.1 – One USB-C Board to Flash ESP32, ESP8266, ESP-01, Arduino & UPDI AVR
One USB-C board to flash almost everything makers useUniversal USB Flasher V2.1 is an open-source US...
-
TankPilot: Smart Water Tank Level Node with Auto Pump Start (ESP32-C3)
TankPilot: smart water tank level node with automatic pump startTankPilot is an open-source ESP32-C3...
-
Dual-Channel 12V LED Dimmer with ESP32-S3 (Open-Source, 100W per Channel)
OverviewA dual-channel 12 V LED dimmer built around an ESP32-S3. Each channel switches up to 100 W (...
-
AutoBath: PIR Bathroom Light and Exhaust Fan Controller PCB (GD32, 230 V relays)
AutoBath is a small controller board for a bathroom. A PIR sensor sees you walk in, the light switch...
-
DotGlow V1: ESP32-S3 + USB-C + Speaker Board for an LED Matrix Clock
Get the DotGlow Android app on Google Play: https://play.google.com/store/apps/details?id=com.electr...
-
🚀 ESP & Arduino Universal USB Flasher (CH340C Based)
OverviewThis project is a universal USB-to-Serial flasher board based on the CH340C USB-UART bridge....
-
Advanced 4-Channel 5V Relay Module with Onboard LM2596 Power Supply
IntroductionRelay modules are essential in home automation and electronics projects, allowing microc...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
307 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
457 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
454 0 1 -







