Wemos D1 mini Proto Board 50 x 45 mm
Wemos D1 Mini Proto Board – 50 × 45 mm Universal Prototyping PCB
Project Overview
The Wemos D1 Mini Proto Board is a compact universal prototyping PCB designed specifically for the Wemos / LOLIN D1 Mini development board.
It combines a dedicated D1 Mini mounting area with a large solderable prototyping grid, making it easy to build custom electronics, sensor interfaces, Wi-Fi controllers, automation circuits, and experimental hardware without using a separate breadboard.
The board features clearly labeled connections, additional linked solder holes, a standard 2.54 mm (0.1-inch) grid, and four mounting holes. Its compact 50 × 45 mm footprint makes it suitable for small electronics projects where space is limited.
This board is part of my DIY Universal Boards open-source hardware collection.
Why I Made This
In 2019, I shared a simple 100 × 50 mm DIY universal PCB. I continued using that board in my electronics projects, but I wanted more sizes and dedicated versions designed around the development boards I use regularly.
Instead of making only one new PCB, I decided to create an entire family of universal boards.
The collection now includes prototyping boards, development-board carriers, shields, adapters, PCB rulers, and LED chaser rulers. All designs follow a consistent 2.54 mm grid and focus on practical layouts, clear silkscreen labeling, and easy construction.
This Wemos D1 Mini Proto Board is designed to make building small ESP8266-based projects easier, cleaner, and more convenient.
Board Features
Dedicated Wemos D1 Mini Footprint
The board includes a dedicated mounting area for the Wemos D1 Mini development board.
The socket/header layout is designed for the standard D1 Mini form factor, with two rows of eight pins and the USB connector positioned on the left side.
The D1 Mini can be installed using standard pin headers, allowing it to be easily removed, replaced, or reprogrammed.
Clearly Labeled Connections
The D1 Mini connections are labeled directly on the PCB to make wiring and debugging easier.
The board provides access to the available development-board connections, including:
3V3
5V
GND
D0–D8
RX
TX
A0
RST
Clear pin labeling helps reduce wiring mistakes and makes the board easier to use for beginners and experienced electronics developers.
Extra Linked Holes
Additional linked holes are provided alongside the main header connections.
These extra holes make it easier to connect jumper wires, external components, sensor modules, and custom circuits without overcrowding the main D1 Mini header positions.
They provide convenient soldering points for signal routing and circuit extensions.
Large Prototyping Area
The right side of the PCB contains a large universal solderable dot-grid area.
This area can be used to build custom circuits directly onto the PCB, including:
Sensors
Resistors
Capacitors
Transistors
Diodes
DIP integrated circuits
Pin headers
Jumper wires
Small electronic modules
Custom signal-conditioning circuits
The prototyping area provides flexibility for developing circuits that work alongside the D1 Mini.
Standard 2.54 mm Grid
The PCB uses a standard 2.54 mm (0.1-inch) grid spacing.
This makes it compatible with common through-hole components, DIP ICs, standard pin headers, and breadboard-compatible components.
It also makes it easy to transfer circuits from a breadboard to the PCB.
Plated-Through Holes
The universal prototyping pads use 1.0 mm plated-through holes with 1.8 mm pads on both sides.
The plated-through construction provides electrical continuity between PCB layers and improves pad strength during soldering, desoldering, and circuit rework.
Four Mounting Holes
Four mounting holes are included near the corners of the board.
These holes make it possible to mount the PCB inside an enclosure, on a project panel, or on a mechanical structure.
Applications
This board is ideal for compact ESP8266-based electronics projects.
Wi-Fi Sensor Projects
Build small wireless sensor devices using the D1 Mini and additional components mounted on the prototyping area.
Possible applications include:
Temperature and humidity monitoring
Environmental sensors
Light monitoring
Water-level monitoring
Door and window sensors
Wireless data collection
Smart Home Projects
The board can be used to develop compact Wi-Fi automation hardware.
Examples include:
Smart switches
Relay controllers
Home Assistant sensor nodes
Wi-Fi control interfaces
Smart lighting controllers
Automation input and output modules
IoT Development
Use the D1 Mini as the controller while building custom interface circuits directly on the board.
The prototyping area can accommodate sensors, interface components, signal conditioning, and additional connectors.
Educational Electronics
The PCB is suitable for students, makers, electronics workshops, and beginners learning:
PCB soldering
Circuit construction
Microcontroller interfacing
Sensor connections
Wi-Fi electronics
Embedded development
It provides a convenient bridge between breadboard experiments and permanent PCB prototypes.
Custom Hardware Development
When a project requires more than a standard D1 Mini development board, the additional prototyping area allows you to build custom hardware without designing a completely new PCB.
Technical Specifications
SpecificationDetailsProjectWemos D1 Mini Proto BoardCompatible boardWemos / LOLIN D1 MiniPCB dimensions50 × 45 mmPCB layers2MaterialFR-4Thickness1.6 mmGrid pitch2.54 mm / 0.1 inchHole diameter1.0 mmPad diameter1.8 mmHole typePlated-throughPad copperBoth sidesPrototyping areaUniversal dot gridMounting holes4LicenseCC BY-SA 4.0
PCB Manufacturing Specifications
Recommended fabrication settings:
Layers: 2
Material: FR-4
Thickness: 1.6 mm
Surface finish: HASL
Lead-free HASL: Recommended for educational projects and boards intended to be shared
Solder mask: Any colour
Silkscreen: White
Minimum hole size: 1.0 mm
No special manufacturing options are required.
The PCB is designed for standard PCB fabrication processes.
Assembly Recommendations
Install the D1 Mini using standard pin headers or female socket headers.
Check the D1 Mini orientation before soldering.
Keep the USB connector accessible for programming and debugging.
Use the extra linked holes for wiring and circuit connections.
Use the dot-grid area for additional components and custom circuitry.
Verify all power and GPIO connections before powering the circuit.
Using female headers allows the D1 Mini to be removed and reused in other projects.
Design Quality
The PCB design has been checked using Design Rule Check (DRC).
The board passes the design rule check with zero errors.
The design uses standard manufacturing specifications and does not require special PCB fabrication options.
Open-Source Hardware
This project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.
You are free to:
Manufacture the PCB
Use it in personal and educational projects
Modify the design
Create derivative designs
Share your improvements
Please provide attribution to the original project and release derivative works under the same license.
Part of the DIY Universal Boards Collection
This PCB is part of my DIY Universal Boards collection, consisting of 24 open-source hardware designs.
The collection includes:
Universal dot-grid prototyping boards
Stripboards
Breadboard layouts
Raspberry Pi Pico carriers
ESP32 development-board carriers
ESP8266 development-board carriers
Arduino Nano carriers
Wemos D1 Mini carriers
C3 SuperMini carriers
Blue Pill carriers
Arduino Uno shields
Arduino Mega shields
Raspberry Pi HAT-size boards
SMD adapters
PCB rulers
LED chaser rulers
The goal is to provide reusable PCB building blocks for makers, students, hobbyists, engineers, and electronics developers.
Project Files
The complete design and manufacturing files are available in the GitHub repository.
DIY Universal Boards Repository:
https://github.com/ElectroIoT/DIY-Universal-Boards
The repository includes Gerber files, documentation, and additional PCB designs from the collection.
Designed by ElectroIoT.in
Designed and shared as part of my open-source electronics and DIY hardware projects.
Website: https://electroiot.in
GitHub: https://github.com/ElectroIoT/DIY-Universal-Boards
Build • Learn • Experiment • Share
Wemos D1 mini Proto Board 50 x 45 mm
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by MANORANJAN DAS
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
BorePilot is an open-source controller board for a single-phase submersible (borewell) pump. An ESP3...
-
EasyArduino
EasyArduino by ElectroIoTThe ultimate beginner’s board to learn, build, and master Arduino the easy ...
-
Wemos D1 mini Proto Board 50 x 45 mm
Wemos D1 Mini Proto Board – 50 × 45 mm Universal Prototyping PCBProject OverviewThe Wemos D1 Mini Pr...
-
Arduino Uno Proto Shield
Arduino Uno Proto Shield – Universal Prototyping BoardProject OverviewThe Arduino Uno Proto Shield i...
-
Arduino Nano Proto Board 70 x 50 mm
Arduino Nano Proto Board 70 × 50 mmUniversal Prototyping Board for Arduino NanoThe Arduino Nano Prot...
-
Arduino Mega Proto Shield
Arduino Mega 2560 Proto Shield – Universal Prototyping BoardProject OverviewThe Arduino Mega 2560 Pr...
-
LED Chaser PCB Ruler 10 cm
LED Chaser PCB Ruler 10 cmA Functional PCB Ruler with a Rainbow LED ChaserThis project combines a pr...
-
LED Chaser PCB Ruler 15 cm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
DIY Universal Board 100 x 50 mm V2
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
ESP32-C3 SuperMini Proto Board 50 x 40 mm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
SafeASP: USB-C AVR ISP Programmer with 1.8-5.5 V Level Shifting (USBasp V6)
Why I made SafeASPThe USBasp is the cheapest and most popular AVR programmer, and I have shared two ...
-
Universal USB Flasher V2.1 – One USB-C Board to Flash ESP32, ESP8266, ESP-01, Arduino & UPDI AVR
One USB-C board to flash almost everything makers useUniversal USB Flasher V2.1 is an open-source US...
-
TankPilot: Smart Water Tank Level Node with Auto Pump Start (ESP32-C3)
TankPilot: smart water tank level node with automatic pump startTankPilot is an open-source ESP32-C3...
-
Dual-Channel 12V LED Dimmer with ESP32-S3 (Open-Source, 100W per Channel)
OverviewA dual-channel 12 V LED dimmer built around an ESP32-S3. Each channel switches up to 100 W (...
-
AutoBath: PIR Bathroom Light and Exhaust Fan Controller PCB (GD32, 230 V relays)
AutoBath is a small controller board for a bathroom. A PIR sensor sees you walk in, the light switch...
-
DotGlow V1: ESP32-S3 + USB-C + Speaker Board for an LED Matrix Clock
Get the DotGlow Android app on Google Play: https://play.google.com/store/apps/details?id=com.electr...
-
🚀 ESP & Arduino Universal USB Flasher (CH340C Based)
OverviewThis project is a universal USB-to-Serial flasher board based on the CH340C USB-UART bridge....
-
Advanced 4-Channel 5V Relay Module with Onboard LM2596 Power Supply
IntroductionRelay modules are essential in home automation and electronics projects, allowing microc...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
307 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
457 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
454 0 1 -







