DIY Universal Board 100 x 50 mm V2
Why I made this
In 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kept wishing it came in more sizes and in versions made for the boards I use every day. So I redrew it and built a whole family: 22 open-source prototype PCBs on one 2.54 mm grid, all with the same plated holes, labels and mounting holes. This board is one of them.
What's on the board
35 x 16 plated hole grid (560 holes)
28 oblong edge strips on the short ends for power entry or edge wiring
4 plated M3 mounting holes
Column numbers on both sides
2.54 mm (0.1") grid: DIP chips, pin headers and breadboard parts fit directly
1.0 mm plated-through holes with 1.8 mm pads on both sides: pads don't lift when you rework
Every board passes the design rule check with zero errors
Specs
ItemValueBoard size100 x 50 mmLayers2Thickness1.6 mm FR-4Grid pitch2.54 mmHole / pad1.0 mm plated / 1.8 mm, both sidesLicenceCC BY-SA 4.0
Good for
Turning a breadboard circuit into a permanent build
Small controllers, LED drivers, sensor nodes
Classrooms and workshops
Order settings
2 layers, FR-4, 1.6 mm
HASL (lead-free is better if you give boards away)
Any solder mask colour, white silkscreen
No special options. Minimum hole is 1.0 mm
Tips
Run bare wire or solder bridges between pads for power lines
Use the edge strips for thick power wires
Part of the DIY Universal Boards family
22 open-source proto boards on one grid: dot-grid boards, stripboard, breadboard layouts, carriers for Pico / ESP32 / ESP8266 / Nano / D1 mini / C3 SuperMini / Blue Pill, Arduino Uno and Mega shields, a Raspberry Pi HAT-size board, an SMD adapter and PCB rulers. All Gerbers and docs: https://github.com/ElectroIoT/DIY-Universal-Boards
Made by ElectroIoT.in - https://electroiot.in
DIY Universal Board 100 x 50 mm V2
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by MANORANJAN DAS
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
BorePilot is an open-source controller board for a single-phase submersible (borewell) pump. An ESP3...
-
EasyArduino
EasyArduino by ElectroIoTThe ultimate beginner’s board to learn, build, and master Arduino the easy ...
-
DIY Universal Board 100 x 50 mm V2
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
ESP32-C3 SuperMini Proto Board 50 x 40 mm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
SafeASP: USB-C AVR ISP Programmer with 1.8-5.5 V Level Shifting (USBasp V6)
Why I made SafeASPThe USBasp is the cheapest and most popular AVR programmer, and I have shared two ...
-
Universal USB Flasher V2.1 – One USB-C Board to Flash ESP32, ESP8266, ESP-01, Arduino & UPDI AVR
One USB-C board to flash almost everything makers useUniversal USB Flasher V2.1 is an open-source US...
-
TankPilot: Smart Water Tank Level Node with Auto Pump Start (ESP32-C3)
TankPilot: smart water tank level node with automatic pump startTankPilot is an open-source ESP32-C3...
-
Dual-Channel 12V LED Dimmer with ESP32-S3 (Open-Source, 100W per Channel)
OverviewA dual-channel 12 V LED dimmer built around an ESP32-S3. Each channel switches up to 100 W (...
-
AutoBath: PIR Bathroom Light and Exhaust Fan Controller PCB (GD32, 230 V relays)
AutoBath is a small controller board for a bathroom. A PIR sensor sees you walk in, the light switch...
-
DotGlow V1: ESP32-S3 + USB-C + Speaker Board for an LED Matrix Clock
Get the DotGlow Android app on Google Play: https://play.google.com/store/apps/details?id=com.electr...
-
🚀 ESP & Arduino Universal USB Flasher (CH340C Based)
OverviewThis project is a universal USB-to-Serial flasher board based on the CH340C USB-UART bridge....
-
Advanced 4-Channel 5V Relay Module with Onboard LM2596 Power Supply
IntroductionRelay modules are essential in home automation and electronics projects, allowing microc...
-
DIY XL4015 5V/5A USB Power Supply – Perfect for Raspberry Pi & More
DIY XL4015 5V/5A USB Power Supply – Perfect for Raspberry Pi & MoreBuilding a reliable 5V power ...
-
7805 Voltage Regulator SMD
Story️ Project DetailsName: 7805 Voltage RegulatorType: Linear Voltage RegulatorInput Voltage: 7V to...
-
Multi-Voltage-Regulator-PCB-(12V-9V-5V-3.3V)
Multi-Voltage Regulator PCB (12V, 9V, 5V, 3.3V) Project OverviewThis project demonstrates the design...
-
7805 Voltage Regulator
Project OverviewThis project demonstrates how to build a simple Voltage Regulator using the 7805 int...
-
🔌 ESP32-C3-Based 8-Channel Smart Home Automation Relay Board
Detailed Project DescriptionThis project is a compact, powerful, and cost-effective 8-channel smart ...
-
ESP8266 NTP Clock with 16x2 I2C LCD Display
This project uses an ESP8266 NodeMCU to create a 12-hour format NTP clock with AM/PM, date, and day ...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
301 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
449 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
453 0 1 -







