LED Chaser PCB Ruler 10 cm

LED Chaser PCB Ruler 10 cm
A Functional PCB Ruler with a Rainbow LED Chaser
This project combines a practical PCB ruler with a fun electronic LED chaser circuit. The board features 10 LEDs positioned along a 10 cm measuring scale, creating a colorful sequential lighting effect.
The LED chaser is built around a TLC555 CMOS timer and a 74HC4017 decade counter. The timer generates clock pulses, while the counter controls the LED sequence. An onboard speed trimmer allows the animation speed to be adjusted.
The entire circuit is powered by a CR2032 coin-cell battery, making the board compact, portable, and suitable for makers, electronics students, hobbyists, and DIY enthusiasts.
This PCB is part of my DIY Universal Boards open-source hardware collection.
Why I Made This Project
In 2019, I shared a simple 100 × 50 mm DIY universal PCB. I continued using it and realized that I wanted more board sizes and different versions designed for the development boards and components I use regularly.
So I redesigned the original concept and created a family of 24 open-source boards, including prototyping boards, development-board carriers, shields, adapters, and PCB rulers.
This LED Chaser PCB Ruler is one of those designs. I wanted to make a board that is not only useful for measuring but also enjoyable to assemble, demonstrate, and learn from.
Features
📏 10 cm PCB Ruler
The PCB includes a 10 cm measuring scale with metric markings and an inch scale. The measuring markings are integrated directly into the PCB copper.
🌈 Rainbow LED Chaser
Ten LEDs are positioned along the ruler, with one LED at every centimeter from 1 cm to 10 cm.
When powered on, the LEDs illuminate sequentially to create a running LED chaser animation.
⚡ 555 Timer Circuit
The circuit uses a TLC555 CMOS timer to generate the clock pulses required by the LED sequence.
🔄 74HC4017 Decade Counter
The 74HC4017 controls the LED sequence by activating outputs sequentially as clock pulses arrive from the timer.
🎛️ Adjustable LED Speed
An onboard trimmer adjusts the speed of the LED chaser.
The approximate operating range is:
1.4 to 12 steps per second
🔌 ON/OFF Switch
A slide switch allows the circuit to be switched on and off without removing the coin-cell battery.
🔋 CR2032 Battery Powered
The circuit is powered by a standard CR2032 coin-cell battery, allowing the board to operate without an external power supply.
🛠️ SMD Assembly
All components are mounted on the top side of the PCB.
The design uses SMD components including SOIC-8, SOIC-16, and 0805 packages, making it an excellent project for practicing surface-mount soldering.
📐 Flat Backside Design
All components are placed on the front side, leaving the back of the PCB flat.
This allows the ruler to lie flat on a surface while being used for measurements.
🔍 Drill Gauge
The PCB also includes drill-size reference holes from approximately 0.5 mm to 2.0 mm.
✨ PCB Artwork
The design includes exposed-gold copper features such as the ElectroIoT.in logo, formulas, color-code information, and decorative PCB markings.
How It Works
The TLC555 CMOS timer generates a series of clock pulses. The pulse frequency can be adjusted using the onboard trimmer.
These clock pulses are sent to the 74HC4017 decade counter.
The counter activates its outputs sequentially, allowing the LEDs to illuminate one after another along the ruler.
By adjusting the speed trimmer, the LED movement can be made slower or faster.
The circuit is powered by a CR2032 coin cell and controlled by the ON/OFF slide switch.
Technical Specifications
SpecificationDetailsProjectLED Chaser PCB RulerPCB ruler length10 cmBoard dimensions120 × 34 mmLED count10LED spacing1 cmTimer ICTLC555 CMOSCounter IC74HC4017Power sourceCR2032 coin cellSpeed adjustmentOnboard trimmerSpeed rangeApprox. 1.4–12 steps/secPower switchSlide switchPCB layers2PCB materialFR-4PCB thickness1.6 mmComponent mountingSMDSMD packagesSOIC-8, SOIC-16, 0805Measuring scalesMetric and inchDrill gauge0.5–2.0 mmLicenseCC BY-SA 4.0
Educational Applications
This project is suitable for:
Electronics students
DIY makers and hobbyists
SMD soldering practice
Electronics workshops
PCB assembly learning
Learning the TLC555 timer
Learning the 74HC4017 decade counter
Understanding clock signals and sequential circuits
Demonstrating LED sequencing
Maker gifts and electronic showpieces
It is a simple and practical way to learn how basic integrated circuits can be combined to create an interactive electronic circuit.
PCB Design and Manufacturing
The board is designed as a two-layer PCB using FR-4 material with a thickness of 1.6 mm.
Recommended manufacturing options:
2-layer PCB
FR-4 material
1.6 mm thickness
ENIG surface finish for a premium gold appearance
LED Chaser PCB Ruler 10 cm
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by MANORANJAN DAS
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
BorePilot is an open-source controller board for a single-phase submersible (borewell) pump. An ESP3...
-
EasyArduino
EasyArduino by ElectroIoTThe ultimate beginner’s board to learn, build, and master Arduino the easy ...
-
LED Chaser PCB Ruler 10 cm
LED Chaser PCB Ruler 10 cmA Functional PCB Ruler with a Rainbow LED ChaserThis project combines a pr...
-
LED Chaser PCB Ruler 15 cm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
DIY Universal Board 100 x 50 mm V2
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
ESP32-C3 SuperMini Proto Board 50 x 40 mm
Why I made thisIn 2019 I shared a simple 100 x 50 mm DIY universal board. I kept using it, and I kep...
-
SafeASP: USB-C AVR ISP Programmer with 1.8-5.5 V Level Shifting (USBasp V6)
Why I made SafeASPThe USBasp is the cheapest and most popular AVR programmer, and I have shared two ...
-
Universal USB Flasher V2.1 – One USB-C Board to Flash ESP32, ESP8266, ESP-01, Arduino & UPDI AVR
One USB-C board to flash almost everything makers useUniversal USB Flasher V2.1 is an open-source US...
-
TankPilot: Smart Water Tank Level Node with Auto Pump Start (ESP32-C3)
TankPilot: smart water tank level node with automatic pump startTankPilot is an open-source ESP32-C3...
-
Dual-Channel 12V LED Dimmer with ESP32-S3 (Open-Source, 100W per Channel)
OverviewA dual-channel 12 V LED dimmer built around an ESP32-S3. Each channel switches up to 100 W (...
-
AutoBath: PIR Bathroom Light and Exhaust Fan Controller PCB (GD32, 230 V relays)
AutoBath is a small controller board for a bathroom. A PIR sensor sees you walk in, the light switch...
-
DotGlow V1: ESP32-S3 + USB-C + Speaker Board for an LED Matrix Clock
Get the DotGlow Android app on Google Play: https://play.google.com/store/apps/details?id=com.electr...
-
🚀 ESP & Arduino Universal USB Flasher (CH340C Based)
OverviewThis project is a universal USB-to-Serial flasher board based on the CH340C USB-UART bridge....
-
Advanced 4-Channel 5V Relay Module with Onboard LM2596 Power Supply
IntroductionRelay modules are essential in home automation and electronics projects, allowing microc...
-
DIY XL4015 5V/5A USB Power Supply – Perfect for Raspberry Pi & More
DIY XL4015 5V/5A USB Power Supply – Perfect for Raspberry Pi & MoreBuilding a reliable 5V power ...
-
7805 Voltage Regulator SMD
Story️ Project DetailsName: 7805 Voltage RegulatorType: Linear Voltage RegulatorInput Voltage: 7V to...
-
Multi-Voltage-Regulator-PCB-(12V-9V-5V-3.3V)
Multi-Voltage Regulator PCB (12V, 9V, 5V, 3.3V) Project OverviewThis project demonstrates the design...
-
7805 Voltage Regulator
Project OverviewThis project demonstrates how to build a simple Voltage Regulator using the 7805 int...
-
-
-
-
BorePilot - ESP32-S3 Smart Borewell Pump Controller
306 0 0 -
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
454 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
454 0 1 -







