Hi all, I was wondering if there is a way to remove the footprint and leave only the Drill pad, in the past I printed another circuit but the footprint outline actually made a connection which I had t...
I am trying to place a capacitor (right) next to an amplifier (left). But cannot move it closer than 0.25mm, although I set the horizontal component spacing to 0.0mm and pad to pad clearance is 0.15mm...
Hello I am interested in Steven-Mark TPU Driver Beta V1 pcb you are offering. Where can I get the components overlay diagram and circuit diagram for it?Kind RegardsMichael
I destroyed a clock radio to turn it into something else, and I used a different display that I already knew how to use. Now I'm trying to reuse the old display, and I've found the commons, bu...
If say I use AS5048A magnetic encoder, to be able to find the angle at such high rpm, would it still be possible to use PWM? Or do I have to use the digital read? In that case, how would I program it?
It connects all the pads altogether even if there’s no connection between them by traces. This is an old project from version 3 opened in the new 4.0.5 version, these pads were unconnected before.
