I want to improve the current on one of my inverter circuits, but I don't have larger heat sinks. The current MOSFETs on there are rated for about 10 amps, but I have others that are rated for 50 ...
I am trying to implement a schottky diode (BAT54C) that takes in +5V from the USB connection and +5V from an external source and joins them so that current does not leak backwards into the USB port. I...
I'm looking to share a file from the pi 3 that contains a password to the pi zero that has the key to decrypt. I was thinking about using MQTT or SSH but am unsure of the file sharing aspect. Addi...
I'm curious if it's possible with inverting the input of two FETs? Or connecting the input of the high side FETs and low side FETs on the opposite side of the motor together,is it possible to ...
Hello, I bought led strip that I plan to connect to a power bank. The strip is rated at 5v and has 144 WS2812B leds. The both sides of the strip have 3 pin connectors and 2 wires for ground and power....
It looks like all of these have a bulge on the top and obviously the reddish corrosion on top. I read up a little about this problem but I wanted a more professional view.
Hi all, I have a portable guitar amplifier (Marshall MS-2) that uses a KIA6213S IC, it comes with a small 8 ohm 0.8W speaker, I've seen people online who plug this little amp to a 12" sp...
I have Values listed in my schematics such as R, G, B, GND etc... but when I load of the netlist it shows it has J1,J2,J3 which are the values too but I want the others. Anyone know how I can change t...
