White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise generated by zener diode working in avalanche mode. Its noise is further amplified by the use of dual opamp. In this case used LM358. All information about the device can be found here :
https://www.instructables.com/White-Noise-Generator/
White noise generator
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by penev_milen
-
I2S codec with power audio amplifier
The board contains PCM5102A TI audio I2S codec, which output is amplified by the use of TPA3116D2 di...
-
Electronic USB KVM Switch
I have few computers on my desk and to make chaos smaller for all of them I use only one keyboard co...
-
Desk VFD clock
The project is based on the soviet IVL2-5/7 vacuum fluorescent display and it is controlled by ESP32...
-
Simplest to build multifunctional alarm clock
Simple clock based on the SC3610D and LCD. It can be configured to work as alarm clock or radio freq...
-
All Band Radio
This PCB is the main part of all band radio based on SI4735 chip. It can be used different controlli...
-
LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
LORADUINO Main board
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
-
Phone call detector
All needed information about the device can be found in the Instructables site : https://www.instruc...
-
White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise gener...
-
Joule Thief Power Bank
All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
-
Arduino nano to uno adaptor board
Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
-
Shield_DMM
This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
-
FM Radio
All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
246 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1161 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
674 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3154 2 4 -
RadioHAT - Raspberry Pi radio development platform
2685 0 4 -
-
