The Arduino is widely used platform for lot of applications. Despite its all advantages in some cases it is not very convenient to use - for changing some parameters in the program it always requires direct cable connection with your PC. For example: If you have an Arduino controlling or monitoring system placed distantly from your house and you want to update the software, to upload the new sketch you have to go there where the Arduino board is suited, connect it throw USB cable to your PC and update the software. The distance to your Arduino system can be kilometers... and it can be placed in the mountings, in the forest and etc. This project solves the mentioned problem. You can upload your sketch in the Arduino board without leaving you home or office. As additional gain for free you receive also the possibility to monitor your sensor data or send commands to your board using the serial monitor or plotter.

The new proposed board is based on the Arduino Uno revision 3, in which the USB to serial converter chip is replaced by UART LORA module. To make the whole system work you need also an USB to serial to LORA converter.