All Band Radio
This PCB is the main part of all band radio based on SI4735 chip. It can be used different controlling microprocessor boards : Arduino, ESP32,ESP8266,STM32...etc.
It can be controlled by touch screen or buttons. On the board is soldered a rotary encoder with switch, which can be used for some controls.
The projects is based on the works of pe0mgb and PU2CLR.
Here are all reference designs and software libraries.
The board is designed in the way, that additional TPA3116D2 audio amplifier board have to be soldered. It supports stereo FM sound. Two speakers can be used with the board. If the amplifier boar is omitted the audio signal can be taken from an audio jack and applied to external amplifier.
The board can be supplied by 5-12V power source. As higher the supply voltage as higher is the output sound power.
The radio uses a ferrite antenna soldered in point TP1 and TP2. How to design it can be read here.
An external rod antenna can be used for FM and AM receiving. For that purpose two BNC connectors are placed on the board.
All Band Radio
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by penev_milen
-
Desk VFD clock
The project is based on the soviet IVL2-5/7 vacuum fluorescent display and it is controlled by ESP32...
-
Simplest to build multifunctional alarm clock
Simple clock based on the SC3610D and LCD. It can be configured to work as alarm clock or radio freq...
-
All Band Radio
This PCB is the main part of all band radio based on SI4735 chip. It can be used different controlli...
-
LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
LORADUINO Main board
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
-
Phone call detector
All needed information about the device can be found in the Instructables site : https://www.instruc...
-
White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise gener...
-
Joule Thief Power Bank
All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
-
Arduino nano to uno adaptor board
Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
-
Shield_DMM
This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
-
FM Radio
All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
228 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
233 0 1 -
-
-
