Top Solder Mask
Top Overlay
Top Copper Layer
Keep Out Layer
Bottom Solder Mask
Bottom Copper Layer
Bottom
Top
GD_Mark_IV
### DESCRIPTION
Gate driver for an interleaved boost converter.
### TECHNICAL DETAILS / COMPONENTS
The design is for high switching frequency. The optocoupler provides isolation with very low propagation delay. The gate driver chip is designed to drive MOSFET up to 250 kHz for a very compact 500W Boost converter
### LEARN / TOPIC / BUILD INSTRUCTIONS
The gate driver pcb needs two power supplies. One to provides the gate drive voltage at +12 Vdc and -12 Vdc and another 12Vdc to be converter to 5V for the optocouplers' primary and secondary side. Grounds are decoupled for safety and noise immunities.
GD_Mark_IV
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Thierry Kayiranga
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
179 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1054 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
603 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3068 2 3 -
RadioHAT - Raspberry Pi radio development platform
2618 0 4 -
-
