Stanley A Meyer Resonant Cavity Holder electrodes

JOIN US HERE

LEARN EVERYTHING BE A GLOBAL MASTER WITH US

NANO BUBBLEWATER FUEL

https://www.patreon.com/c/securesupplies/shop

Daniel's kind-hearted approach and dedication to a cleaner energy future deserve recognition and support.

JOIN SUPPORT LEARN MORE HERE     https://www.patreon.com/c/securesupplies

You can contribute to his ongoing efforts by donating through PayPal at https://www.paypal.com/donate/?hosted_button_id=29MNNNGUSBQXW

Additionally, joining his Builder Level on Patreon at https://www.patreon.com/c/securesupplies grants you access to exclusive updates, resources, and a community of like-minded supporters dedicated to advancing hydrogen technology.

By supporting his work, you join in the journey toward a sustainable future. Godspeed, Daniel Donatelli!

These replicated cavities are the ones used on the buggy. Some machining is required for the inner electrodes, cost effectiveness may not be ideal for many experimenters. Therefore, a 3D printable and glue-together template was made to allow those with simple hand tools (grinder or Dremel cutoff wheel) to be able to cut slots into a 1/2" tube. In addition to this template, a 3d printable insert can be pressed or hammered into the inner diameter portion of the inner tube to provide analog to having a solid electrode.

Inner electrode dimensions: 4.00" length, 0.500" outside diameter, 0.400" inside diameter, 0.050" wall

Outer electrode dimensions: 2.75" length, 0.75" outside diameter, 0.680" inside diameter, 0.035" wall

The terminal holes should be drilled out to receive a 1/4-20 tap.