MAGDALENA MIŠIĆ
BOSNIA AND HERZEGOVINA • + Follow
Tools, APP Software Used etc.
|
KiCad 8.0KiCad
|
Description
Sensoric board
In this case we use 6 IR sensors, because we didnt want to have problems with the cables, we made on board and we connect all of these sensors on it. Also we have power supply for all of them on the board, and information of these sensors we sent on RPi4 to know about position of the robot.
Schematic and Layout
Nova_senzorska_ploca.kicad_pro
Feb 11,2025
76 views
Sensoric board
Six IR sensors connected on one board.
76
0
0
Published: Feb 11,2025
Download Gerber file 0
BOM(Bill of materials)
Centroid file
PCBWay Donate 10% cost To Author
File Last Updated: 2025/02/11 (GMT+8)
File update record
2025-02-1107:59:38
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by MAGDALENA MIŠIĆ
-
SIMA Mainboard
SIMA (The small independent mobile actuator) is one of our projects for Eurobot 2025 competition. A ...
-
Sensoric board
In this case we use 6 IR sensors, because we didnt want to have problems with the cables, we made on...
-
PCB for STMF401RE
This project is about STMF401RE and controling the movement of the robot. Because of communication o...
-
Power board
It is the simpliest way to have all power supplies on one place, we did that. We need to use a diffe...
-
Raspberry pi4 HAT
This RPi4 Hat can help us to know about position of our robot with IR sensors and Lidar, and to comm...
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
165 0 2 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
120 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
368 4 1 -
How to measure weight with Load Cell and HX711
418 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
528 0 0
