The QuinLED-Quad, version 1 revision 6 is a 4 channel ESP32 based based PWM WiFi LED dimmer which integrates natively with Home Assistant. Some of it's unique properties are that it has 4 independent channels with high current handling and PWM frequencies up to 300.000Hz making it suitable for video work. All videos on the Intermittent Technology YouTube channel are shot using these dimmers lighting everything!

Works with any analog LED strips or COB LEDs up to 28v and is able to drive 4 individual LED strips or 1xRGBW strip or any other configuration you wish to make. Also provides 2 broken out GPIO pins and an onboard temperature sensor.

The board uses an ESP32 module you can program yourself or run ESPhome as the software core, providing a very easy way to configure the board and Home Assistant making it easy for the people just starting out with LEDs and Home Assistant!

The QuinLED-Quad has been developed from the ground-up to be an easy DIY project even for people just getting started. The total cost per board is less than 10$ and all information to build one (part lists, (YouTube) tutorials, configuration examples, etc.) can be found on https://quinled.info

Quick links:

QuinLED-Deca and QuinLED-Quad usage examples with Home Assistant: https://www.youtube.com/watch?v=Sd77zavUyjM

QuinLED-Quad Hardware specifications and capabilities: http://quinled.info/2018/09/07/quinled-quad/

QuinLED-Quad Hardware buying guide: http://quinled.info/2019/12/19/quinled-quad-hardware-guide-v1r6/

QuinLED-Quad Soldering Guide (Video guide!): http://quinled.info/2018/12/03/quinled-quad-soldering-guide/