The QuinLED-Deca, version 1 revision 7 is a 10 channel ESP32 based based PWM WiFi LED dimmer which integrates natively with Home Assistant. Some of it's unique properties are that it has 10 independent channels with high current handling and PWM frequencies up to 300.000Hz making it suitable for video work. All videos on the Intermittent Technology YouTube channel are shot using these dimmers lighting everything!

Works with any analog LED strips or COB LEDs up to 50v and is able to drive 10 individual LED strips or 2x RGB+CCT strips or any other configuration you wish to make. Also provides 4 broken out GPIO pins and an onboard temperature sensor.

The board uses an ESP32 module you can program yourself or run ESPhome as the software core, providing a very easy way to configure the board and Home Assistant making it easy for the people just starting out with LEDs and Home Assistant!

The QuinLED-Deca has been developed from the ground-up to be an easy DIY project even for people just getting started. The total cost per board is less than 20$ and all information to build one (part lists, (YouTube) tutorials, configuration examples, etc.) can be found on https://quinled.info

Quick links:

QuinLED-Deca and QuinLED-Quad usage examples with Home Assistant: https://www.youtube.com/watch?v=Sd77zavUyjM

QuinLED-Deca Hardware specifications and capabilities: http://quinled.info/2018/09/08/quinled-deca/

QuinLED-Deca Hardware buying guide: http://quinled.info/2019/12/19/quinled-deca-hardware-v1r7/

QuinLED-Deca Soldering Guide (Video guide!): http://quinled.info/2019/01/26/quinled-deca-soldering-guide/