|
OnShapeOnShape
|
Mechanical Keyboard Laptop
My lenovo yoga 730-13 once again had a broken keyboard, but since I already replaced it once, I decided to go further... I used PCBWay's sheet metal fabrication to create a new main enclosure. This enclosure was larger and designed to fit a low-profile mechanical keyboard. Since the enclosure is thicker I also added I/O to the laptop by Integrating a usbc hub right into the laptop. It is quite the dramatic redesign but I think it looks quite cool.
I attached all the parts, however this is not simply ready to assemble. I drilled holes and added screws after the fact so I do not recommend replicating this exact project.
Full Build Video: https://youtu.be/b6rUk3YLsN0
Mechanical Keyboard Laptop
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(10)
More by Marcin Plaza
-
Mechanical Keyboard Laptop
My lenovo yoga 730-13 once again had a broken keyboard, but since I already replaced it once, I deci...
-
Building a modular monitor mounting system
I designed a sheet metal part that attaches to a monitor and allows them to be tiled to each other.I...
-
3D Printed and Sheet manufactured Modular Couch
In my newest project I present a DIY modular couch I built.Since I didn't have access to large woodw...
-
A Modified zFlip 5
With many Samsung zFlip phones hitting the unfortunate fate of a broken folding screen, I took it as...
-
Desktop Graphics pack for Ultrawide DS steam deck
This project is a continuation of the Ultrawide DS: https://www.pcbway.com/project/shareproject/A_DI...
-
A DIY Steam Deck... Ultrawide DS
Here is the full video going over the whole process and the struggles I went through: (video will be...
-
Programmable Mist Maker - XIAO / QT PY Extension
1385 2 1 -
RadioHAT - Raspberry Pi radio development platform
1163 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3538 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4209 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4585 2 2
