The QuinLED-An-Penta is a 5 channel ESP32 based analog PWM LED controller/dimmer! Designed to run WLED or ESPhome it is the ideal board for running LEDs standalone using an App or tied into Home Assistant natively! Designed to build yourself, advanced but still easy to solder!

Unique properties are high power handling, 2 onboard fuses, 4x Positive and 5x Negative (LED channels) terminals to run any combination of LED setup from RGB, RGBW to RGB+CCT (RGB + Dual White) all possible. The board has specifically been designed for high power setups where you might want to run several high powered white LED strips, allowing a max of 10Amps over a single channel or ~20Amps for the total board. Fully 12v and 24v compatible with a max input voltage of 36v for running other loads (flyback diodes and capacitor possible for inductive loads!).

Lots of advanced features such as very high PWM frequencies possible (120kHz+), 3x dedicated HW debounced button input terminals, I2C temperature sensor and I2C terminals and an optional OLED display.

Using a pluggable ESP32 (D1 Mini32 form factor) and with the custom QuinLED-ESP32 the board can be configured with an ESP32 with onboard antenna, external antenna or even wired Ethernet! Hate WiFi connected smart devices? This is your board!

! Please note that to be able to build this board you will require to order a stencil with it !

Total cost per board with components is less than 20$. More information (part lists, (YouTube) tutorials, configuration examples, etc.) can be found on https://quinled.info !

--Current version v1r2