|
KiCADKicad
|
PWTS_POWERPACK
Part of the "Playing with the sun" experimental learning kit.
Some of the design philosophy while doing these PCBs is to rectify all outputs (using schottkys), and protect all inputs (using zeners).
The Zener isn't strictly neccesary, and the powerpack will store energy without it, but the ultracap is rated at 5.5V, so you need to trust your power source... DO YOU TRUST YOUR POWER SOURCE???
.. If you're sure the kids playing with this will never put more than 5V on anything, feel free to take that risk... ;)
PWTS_POWERPACK
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by robotto
-
D1 mini ESP32 grove shield
This is a base shield that lets you use the D1 mini ESP32 board with the Grove system connectors for...
-
PWTS_POWERPACK
Part of the "Playing with the sun" experimental learning kit.Some of the design philosophy while doi...
-
PWTS_MOTOR
Part of the "Playing with the sun" experimental learning kit.Some of the design philosophy while doi...
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
817 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3277 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3897 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4277 2 2
