|
540-88-044-24-008Preci-dip
|
x 1 | |
|
PLCC-84-ATAdam Tech
|
x 1 |
JTAG Programming & Testing Board for ATF1502 & 1504 CPLDs
This is a small board to support JTAG programming (tested with Microchip ATDH1150USB) and general testing of ATF15xx CPLDs. I designed it help development of some new boards for the rosco_m68k project.
PLCC44 and PLCC84 variants are directly supported. Power can come from DuPonts, a 5V barrel jack or USB-C.
The board is four layer. It's quite small so should be reasonably cheap, and all components are through-hole so nice and easy to solder.
The 15xx's are really the last good 5V CPLDs that are in production - make use of them, encourage Microchip to not discontinue them!
I needed a board to do some testing with ATF1504 CPLDs for a new rosco_m68k thing I was working on, and thought it might also be useful to others. So here you go :)
JTAG Programming & Testing Board for ATF1502 & 1504 CPLDs
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Ross Bamford
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
512 0 0 -
RF Control training board for students based on ESP32 C3
691 0 2 -
Aquarius+ Computer, Standard PCB
914 0 4 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
609 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
536 0 1 -
Nintendo Famicom HVC-001 Controller Shells
631 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
597 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
806 1 7 -