AVR High Voltage Programmer 2
AVR-HV2 is Arduino based high voltage parallel programmer for AVR microcontrollers. This programmer can read, write, and erase both flash memory and EEPROM. Also, this can use to set fuse bits of AVR MCUs.
AVR-HV2 programmer is designed as an Arduino Mega shield. Dimensions of the AVR-HV2 are similar to the Arduino Mega board. It can be powered using a power source connected to the Arduino Mega board. The suggested power source for this programmer is a 12V 1A DC power adapter.
The control software of this programmer is design to work on both Windows and Linux operating systems. It supports the import and export of memory data in the Intel hex file format. The communication link between the programmer and the control software is established through the USB port.
The current firmware and control software of this programmer supports most of the generally available AVR MCUs which including ATmega8, ATmega328, ATmega32, ATmega16, etc. The AVR MCUs with extended addressing modes are currently not supported.
This is an open-source hardware project. All the design files, documentation, firmware source code are available to download at the project source repository.
AVR High Voltage Programmer 2
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(6)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
10design
-
10usability
-
10creativity
-
10content
-
9design
-
9usability
-
9creativity
-
9content
More by Dilshan Dilshan Ranmal Jayakody
- Echo Generator for Microphones This project is about a single-channel microphone echo generator circuit. This circuit builds around...
- Universal HD44780 LCD interface YALI (Yet Another LCD Interface) is an open-source project to provide a universal interface to drive...
- 6-channel stereo speaker selector This project is a DIY six-channel stereo speaker selector based on STC15W201 MCU. The purpose of thi...
- 5.1 channel analog audio processor In this project, we developed a 5.1-channel analog audio processor using PT2322 IC. PT2322 is an ine...
- StarPointer - virtual electronic finderscope StarPointer is a virtual electronic finderscope for astronomical telescopes. This device works with ...
- Narrowband FM receiver for 2-meter band This project is about MC3362 and ADF4351 based modularized, 2-meter narrow band FM receiver. In this...
- 5.1 channel audio preamplifier This project introduces a digitally controlled 5.1 channel audio preamplifier system. This amplifier...
- NTP based digital clock panel This project introduces an open-source, ATmega328 based, configurable NTP clock with a 2.3-inch, 7-s...
- AVR High Voltage Programmer 2 AVR-HV2 is Arduino based high voltage parallel programmer for AVR microcontrollers. This programmer ...
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
488 0 0 -
RF Control training board for students based on ESP32 C3
647 0 2 -
Aquarius+ Computer, Standard PCB
859 0 4 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
595 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
515 0 1 -
Nintendo Famicom HVC-001 Controller Shells
615 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
573 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
778 1 5 -