|
KiCADKicad
|
12V Lighting Circuit-ver. 3
I designed this to add a 12v lighting system to a DIY ebike quadcycle. I wanted it to incorporate standard auto relays for reliability, and allow for connectivity with most ebike or motorcycle handlebar controls.
Starting with an inexpensive ebike/atv handlebar control, I then got a cheap LED ebike/motorcycle headlight, turn signals and brake/night lights. There is also a terminal for an additional button or ebike lever for brakes.
For ease of design, there are 4 leads that need to be soldered. Just solder a wire or jumper wire to any M1 to its corresponding M2.
For ver.2 I added the horn circuit and in ver.3 I added hazard lights control.
12V Lighting Circuit-ver. 3
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
278 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
358 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1428 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
797 0 1
