I was hoping to 3d print a head for an engine and use multiple metals for it, like stainless steel for valve seats and the exhaust ports, then tool steels for the bearing for the valves. Is the possib...
Hi! I was wondering if PCBWay had the capacity to do tube notching with the CNC machinery? It would be used for the frame of a collegiate FSAE IC car. Thanks!
Can you 3D Print the Sony CRF-320 and CRF-330 shortwave gear, (the large gear) for me.? If you need the files, I have the infusion 360 files I can provide. If you can, can you give me a price for 10...
hii need a pcbonly available is top bmp image and the top silk.bottom is solid copper.2 layers are connected with vias as seen from the bmp imagecan do this for me ?thanks
In my PCB, I need to solder square pins into circular holes on traces. The pins have basis diameters of 1.4mm and 1.05mm. Which hole diameter should I include in the design: 1.4mm and 1.05mm (assuming...
I got a Question? I bought a Tuner for my Sony CRF-330K 33-Band Shortwave Radio I bought a rebuilt Shortwave Tuner & they didn’t replace the (1) Plastic Gears on the Tuner can I purchase the 1 gea...
how do i get a quote for the pcb assembled? i clicked pcb and assembly but it wants me to input layers from gerber file but i have no clue what to fill in.
I want to design a ~30cm long 4-layer flexible PCB which requires 100ohm impedance match for the differential pairs. It seems like as the dielectric layer is very thin, it's hard to do that. Do you ha...
