I have a design that uses a BSS84AKW. However, the rating from Nexperia for this part is 50V 150mA whereas Good-Ark rates it as 60V 300mA. If I just specify it as BSS84WK, what would the rating be o...
Hi mister,Have you released the openevse board ?Did you have any problems with it during testing?I made cards but couldn't get them to work. I have problems with the pilot signal.Problem with +12V -12...
I have a number of repairs for specific pcb's for unique systems that require repair. If you can help I would be grateful if you can email.Please let me know if you need any additional information - m...
4 x Audio Signal inputs via RCA or XLR (balanced) on one Output (REAR) RCA or XLR.should have no Distortion (or absolute LOW)PCB can be 3 Layer Designno Input level control neededshould be possible to...
A Project of mine requires a small number of ICs with supporting <3mil traces and spacing, about which ive asked previously and gotten a good answer.I have gotten quite a lot further through the pr...
Hello, I have built the adapter and programmed it with the settings provided successfully. Everything looks fine, the PCB is clean, all contacts are fine and the joystick port works, but a PS/2 mouse ...
I have a project with sheet metal using SUS304 thickness 1 mm. I cannot find any information about the dimension of the self-clinching standoffs like show in attached picture. I want this information ...
