1. Blog>
  2. The depth and width of the v-cuts/grooves

The depth and width of the v-cuts/grooves

by: Mar 28,2018 826 Views 0 Comments Posted in Engineering Technical

Typically the depth of the v-cut is 3/4 of the thickness of the board. So if you want to do v-cuts we recommend the center of the v-cut line to any traces. Please bear this in mind when designing your panels.


image.png


image.png


image.png

V-Cut machine

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
Back to top