|
KiCADKicad
|
gbaHD AIO Shield
This is a Spartan Edge Accelerator shield which implements all the hardware connections needed for zwenergy's gbaHD, no wires required! The PCB incorporates the GBA motherboard, Arduino Nano, and SNES controller port used in a typical gbaHD installation, and interfaces directly with the Spartan Edge Accelerator board via pin header connections.
For more info, please visit my GitHub repo!
gbaHD AIO Shield
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(13)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Zekfoo
-
Programmable Mist Maker - XIAO / QT PY Extension
1147 2 1 -
RadioHAT - Raspberry Pi radio development platform
956 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3381 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3997 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4387 2 2
