Wled neopixel controller
A simpy and tiny ws2812b and sk6812 led controller.
BOM:
HT73_WIDE - ht7833 voltage regulator 3.3V
1 ESP - esp-01 connector 2x4
AK500/2 - 2pin screw terminal
C1210 - two 100uf capacitors
MOMENTARY-SWITCH-SPST-SMD-6.0X3.5MM - two buttons 6x3.5 mm
AK500/3 - 3pin screw terminal
R0603 - 4k7 resistor
also available at my tindie store: https://www.tindie.com/products/21371/
Wled neopixel controller
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(5)
More by Oleg Jusaew
-
Programmable Mist Maker - XIAO / QT PY Extension
1147 2 1 -
RadioHAT - Raspberry Pi radio development platform
957 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3381 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3997 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4389 2 2
