NanoServo project
This board provides the interface between the NANO and the servos for the Animatronic Eyes presented on the Instructables web site.
NanoServo project
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Gerald Maurer
-
PowerMonitor_V7_2
This project was designed to monitor current in up to four AC circuits. It is configurable through t...
-
CUBOTino2 project
Raspberry {I Zero 2 interface board for CUBOTino Rubik's Cube solver as described on Instructables w...
-
NanoServo project
This board provides the interface between the NANO and the servos for the Animatronic Eyes presented...
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
58 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
887 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
523 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2988 2 3 -
RadioHAT - Raspberry Pi radio development platform
2532 0 4 -
-
-
