VOTE NOW!
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Design 1/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Usability 2/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Creativity 3/4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Content 4/4

Segger J-Link to Tag-Connect TC2050 adapter


It follows standard JTAG/SWD pinout used on many Cortex-M boards.


Features:

  • IDC 20 (0.10") connector for Segger J-Link
  • IDC 10 (0.10") connector for Tag-Connect TC2050-IDC or TC2050-IDC-NL
  • IDC 10 (0.05") connector for Tag-Connect TC2050-IDC-050, TC2050-IDC-050-ALL, TC2050-IDC-NL-050, TC2050-IDC-NL-050-ALL or directly to JTAG/SWD header
  • Jumper to connect pin 5 to +5V or GND
  • Jumper to connect pin 9 to nTRST


Tag-Connect TC2050-IDC-050 and TC2050-IDC-NL-050 have no pins 5 and 9 connected, so the jumpers do nothing for these two cables.


Bill of materials used in this project

IDC 20 socket (0.10")
1
IDC 10 socket (0.10")
1
IDC 10 socket (0.05")
1
Goldpin 1x2
1
Goldpin 1x3
1
Oct 26,2020
261 viewsReport item
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More