SOT23 and MSOP10 to DIP adapter
2 Layers PCB 15.24 x 10.16 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
A board to adapt MSOP10 and SOT23 footprints to DIP footprint for easy experimentation.
1186
0
0
Published: Aug 06,2020
Standard PCB
Download Gerber file 19
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Dimitrios Airantzis
-
N2 Express mini card connector breakout
A board to break out the signals coming from a Mini PCIe connector into a series of terminal block c...
-
SOIC8 adapter
I need to work with a memory component that is available only in SOIC 8 package. This board transfo...
-
SOT23 and MSOP10 to DIP adapter
I needed to develop a circuit involving a DAC component that was only available in MSOP10 package. ...
You may also like
-
A Compact Charging Breakout Board For Waveshare ESP32-C3
486 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
492 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
687 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
675 0 1
