RT950 Desktop
This is the case for my desktop transceiver converted from a Radtel RT-950 Pro handheld.
Notes:
- ⚠️ Remember that if you are going to use your new desktop in a hot environment such as inside a vehicle or you do a lot of TX (generates internal heat) you should print in a high-temperature plastic such as ABS or ASA. ASA is UV resistant and great if you intend to use your new desktop in direct sunlight ☀️. If you find ABS or ASA tricky to print, PETG is a good middle ground, more heat-tolerant than PLA and much easier to print than ABS or ASA. Happy printing!
- The lamps and buttons should be printed in clear / translucent material. If a clear / translucent option is not listed for your chosen material, just ask PCBWay for it, they are very helpful!
- The selected postage / shipping service makes a big difference to the cost, so choose carefully.
Please watch my project videos for more details.
73 M0XEB
RT950 Desktop
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Electro Bananas
-
Si4732 Mini & ATS-20+ Hybrid Front Panel
A front panel that can be used to combine the Si4732 Mini and the ATS-20+ to create a receiver that ...
-
RT950 Desktop
This is the case for my desktop transceiver converted from a Radtel RT-950 Pro handheld.Notes:️ Reme...
-
ATS Radio Desk Stand
A handy desk stand for the ATS range of handheld multiband radiosSuitable for the following models.....
-
Banano Board Prototyping Case
This special enclosure allows you to quickly mount a Banano Board for prototyping without screws - t...
-
Banano Board - ElectroBananas Arduino Nano-based universal controller board
The Banano Board is a Arduino Nano-based universal controller board as featured in the ElectroBanana...
-
Programmable Mist Maker - XIAO / QT PY Extension
2143 2 2 -
RadioHAT - Raspberry Pi radio development platform
1822 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4031 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4766 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5583 2 2 -
