Top Solder Mask
Top Copper Layer
Bottom Copper Layer
Bottom
Top
QuickCharge Stick
### DESCRIPTION
This little USB stick can be connected to QuickCharge 2.0+ power adapters and powerbanks and will output 12V Dc within a few seconds. It works by telling the Powerbank/Adapter it wants to charge at 12 volts. This device can be used to power any project that needs less than 18W from cheap and universal quick charge enabled power sources.
### TECHNICAL DETAILS / COMPONENTS
All the magic is done by an 74HC125 whose inputs are timed with an RC. It activates two voltage dividers on the USB data lines at different times.
### LEARN / TOPIC / BUILD INSTRUCTIONS
Decide wether you want to mount an micro-usb port on the backside or an type a plug on the top side.
QuickCharge Stick
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
3design
-
3usability
-
2creativity
-
4content
More by Gilberto Rossi
-
Programmable Mist Maker - XIAO / QT PY Extension
1076 2 1 -
RadioHAT - Raspberry Pi radio development platform
891 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3334 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3946 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4336 2 2
