PROGRAMADOR ISP PARA MICROCONTREOLADORES AVR
Programmer for MCU AVR.
Shield to program AVR microcontrollers, using the ISP protocol, using an Arduino UNO board.
You can program 8, 14, 20, 28 and 40 pin Microcontrollers.
Components used:
- 1 ZIF socket 40-pin.
- 4 Resistors of 220 ohms (0805)
- 1 Resistor of 100 ohm resistor (0805)
- 1 Red LED (0805)
- Male pins.
PROGRAMADOR ISP PARA MICROCONTREOLADORES AVR
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(8)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Carlos Quispe
-
PROGRAMADOR ISP PARA MICROCONTREOLADORES AVR
Programmer for MCU AVR.Shield to program AVR microcontrollers, using the ISP protocol, using an Ardu...
-
PIC PICKIT2 PROGRAMMER
Programmer for 8, 14, 10, 18, 28 and 40-pin PIC microcontrollers
-
TRAINER FOR THE RASPBERRY PI PICO (RP2040)
Training board for Raspberry pi pico. (RP2040)OLED Screen ManagementUART to USB driverManagement of ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1150 2 1 -
RadioHAT - Raspberry Pi radio development platform
958 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3382 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3999 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4389 2 2
